What did you do to your GX TODAY?
#256
Pit Crew
iTrader: (1)
Fluid - Where did you get your seat covers? I love the idea. I just spent the better part of Saturday scrubbing down the back seats of our 2006 GX.
Interestingly, while searching for seat covers, I came across this site: http://www.seatcoverman.com/cotton.html
He uses a GX on his homepage banner, yet he doesn't offer Lexus as a manufacturer option.
Interestingly, while searching for seat covers, I came across this site: http://www.seatcoverman.com/cotton.html
He uses a GX on his homepage banner, yet he doesn't offer Lexus as a manufacturer option.
#258
#259
Pole Position
Tonight I dug into my front brakes, as I've been underwhelmed by the braking lately. I had new rotors, and hawk lts pads to put on, but when I got in there I found seized calipers on one bank of pistons on both front calipers. Looks like new calipers are in my future.
#260
Pole Position
Did an oil change today. This is the GX's first oil change since I purchased it last November.
According to mylexus, the truck has been regularly serviced by a dealer. Not too sure about that. Can independent shops add data to mylexus?
Had to use a breaker bar to remove the 12mm bolts on the skid plate. The oil filter was on really tight! Oil filter was not OEM. The only way I could get the drain plug out was to use "Bluto" my Ingersol-Rand super whammer jammer impact drill. The drain plug was either going to unscrew or have its head ripped off. Scarey! Whew! The plug unscrewed. There was no crush washer on the plug. Drain plug access cover is missing. I'm going to install all new skid plate hardware and repaint the skid plate next oil change. Put in Mobil1 synthetic and a Mobil1 high capacity filter. Installed a new drain plug and a crush washer. Put anti-seize compound on the old skid plate hardware. Things should go much easier next time!
According to mylexus, the truck has been regularly serviced by a dealer. Not too sure about that. Can independent shops add data to mylexus?
Had to use a breaker bar to remove the 12mm bolts on the skid plate. The oil filter was on really tight! Oil filter was not OEM. The only way I could get the drain plug out was to use "Bluto" my Ingersol-Rand super whammer jammer impact drill. The drain plug was either going to unscrew or have its head ripped off. Scarey! Whew! The plug unscrewed. There was no crush washer on the plug. Drain plug access cover is missing. I'm going to install all new skid plate hardware and repaint the skid plate next oil change. Put in Mobil1 synthetic and a Mobil1 high capacity filter. Installed a new drain plug and a crush washer. Put anti-seize compound on the old skid plate hardware. Things should go much easier next time!
#261
Did an oil change today. This is the GX's first oil change since I purchased it last November.
Had to use a breaker bar to remove the 12mm bolts on the skid plate. The oil filter was on really tight! Oil filter was not OEM. The only way I could get the drain plug out was to use "Bluto" my Ingersol-Rand super whammer jammer impact drill. The drain plug was either going to unscrew or have its head ripped off. Scarey! Whew! The plug unscrewed. There was no crush washer on the plug. Drain plug access cover is missing. I'm going to install all new skid plate hardware and repaint the skid plate next oil change. Put in Mobil1 synthetic and a Mobil1 high capacity filter. Installed a new drain plug and a crush washer. Put anti-seize compound on the old skid plate hardware. Things should go much easier next time!
Had to use a breaker bar to remove the 12mm bolts on the skid plate. The oil filter was on really tight! Oil filter was not OEM. The only way I could get the drain plug out was to use "Bluto" my Ingersol-Rand super whammer jammer impact drill. The drain plug was either going to unscrew or have its head ripped off. Scarey! Whew! The plug unscrewed. There was no crush washer on the plug. Drain plug access cover is missing. I'm going to install all new skid plate hardware and repaint the skid plate next oil change. Put in Mobil1 synthetic and a Mobil1 high capacity filter. Installed a new drain plug and a crush washer. Put anti-seize compound on the old skid plate hardware. Things should go much easier next time!
I just did oil/filter change on past Sunday, (my first as well, getting rid of Chevy dealer oil and AC delco filter) and I too needed the breaker bar to remove the bolts on skid plate. (I removed all of it, including the plastic cover ahead of the skid plate) My drain plug gasket was there, and it wasn't too bad to remove, I used torque wrench to tighten it back up, and the anti-seize compound on the skid plate bolts too... and I used mobile 1 extended range (15k) oil and mobile 1 filter as well... (bought oil from walmart on sale for 25$ (5qt bottle, needed 1/5th of the next bottle) and I had stock piled Mobile 1 filters for 3 other Toyota products in my household)
By the way, how is your dash cam holding up?
#262
Pole Position
You and I are like on same schedule, running into same things.. lol.
After dealing with the problems during our oil changes, it's very obvious that the shops don't put "Master Mechanics" in the oil change bay!
(bought oil from walmart on sale for 25$ (5qt bottle, needed 1/5th of the next bottle)
I used torque wrench to tighten it back up,
By the way, how is your dash cam holding up?
I did change the resolution back to 720 from 1080. The field of view is just not wide enough in 1080.
#264
Pole Position
#265
Yeah, it was about 6.5 quarts. Between 4 cars, the extra 5qt bottle go almost empty. The torque specs I read were between 25-30 ft lbs, I left them at 28. I really didn't feel comfortable going more. Local Lexus dealer gave me the gasket washers free. I do oil changes for all cars in my household on 1 day, and next change is in October. Fun!
I think I'm going to get the same dash cam, really can't justify spending more, I'm glad its working out good.
I think I'm going to get the same dash cam, really can't justify spending more, I'm glad its working out good.
#266
Pole Position
Yeah, it was about 6.5 quarts. Between 4 cars, the extra 5qt bottle go almost empty. The torque specs I read were between 25-30 ft lbs, I left them at 28. I really didn't feel comfortable going more. Local Lexus dealer gave me the gasket washers free. I do oil changes for all cars in my household on 1 day, and next change is in October. Fun!
I think I'm going to get the same dash cam, really can't justify spending more, I'm glad its working out good.
I think I'm going to get the same dash cam, really can't justify spending more, I'm glad its working out good.
#267
Got rid of my old Cross Terrains and had 4 new Michelin LTX M/S2 installed, what a difference, night and day. Very happy with this although they were expensive I think the quality shows
#269
Pole Position
Used a file to put a 'V' in the lip of the gas door release lever under the dash.
Now I can tell the hood release from the gas door release by feel.
No more opening the hood at the gas station !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!+1000
Now I can tell the hood release from the gas door release by feel.
No more opening the hood at the gas station !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!+1000
#270
Lexus Champion