engine cover fasteners
There are several different sizes & types - could you identify which one(s) you need? I just ordered some replacement ones for my 2004 from Sewell - their website has the illustrations to show the different engine covers and fasteners, tho it took me some searching to find which figure to use, as some are treated as engine compartment, some as part of the front bumper, etc. Since I've just gone through this I'll help find the numbers if you can provide some more info of the locations you need.
[QUOTE=mann777;6355166]Ok here is it.
Front above the Radiator - 12 nos - 90467-08217
Right side over the Air Filter - 5 nos - 90467-07117
Left side Driver Side - 4 nos - 90467-06155 ( Push button Type)
Hope this Helps[/Q
06115 are the plastic screws that hold both covers against the firewall
07117 are the push buttons that are used for both covers, the numbers needed are correct
Front above the Radiator - 12 nos - 90467-08217
Right side over the Air Filter - 5 nos - 90467-07117
Left side Driver Side - 4 nos - 90467-06155 ( Push button Type)
Hope this Helps[/Q
06115 are the plastic screws that hold both covers against the firewall
07117 are the push buttons that are used for both covers, the numbers needed are correct
thats rite alan...thks for the correction...the only difficulty faced is when you intergrate the front Radiator Cover and the RH Side cover ( RH Side Cover over the Filter ) and lock the ones towards the corner of the headlamp, there is no support to push down the lock, you may have to give some support from down via the gaps available to hold down the locks.
Thread
Thread Starter
Forum
Replies
Last Post
ddvette9
IS - 3rd Gen (2014-present)
2
Feb 6, 2015 09:03 PM








