Nice! digging the paddle shifters.

 

Here are som pics of the Paddle install. Please not my car was a non e-shift model so i had to wire them directly to the ecu. The whole mod took rooughly 2 hours and was a piece of cake.

 

bit of plastic trimmimg and done.

 

Paddles in action 0 - 100 4.9 seconds car is putting down 350hp atw @16 psi

 

Here is the link to my youtube channel I tried to keep a samll video diary of the swap.

http://www.youtube.com/user/10exa/videos

 

I thought i would have got alot of questions on this im suprised.

 

I will be doing this mod in a couple of weeks. I know my steering wheel has the plugs in there from when I removed my e-shifr wheel. Seems like the most challenging part would be fabricating some mounting brackets for the paddles.

 

The brackets where easy mate. The metal is about and inch and a half long and 3/4 high. I just bent it with a hammer and vice they took me roughly 8 minutes to make

 

i thought the brackets came from an IS350? or you fabricated them yourself?

 

Very impressive. It would probably take me 2 months just to take out the headlights

 

Congrats on your swap but i need to correct you home slice you just did 62.14 mph in 4.9 seconds, remember your cluster is in kmh and 180 kmh equals 111.85 mph. Oh you might be putting done with your mods 278-305 to the ground.

 

tmf2004 The paddles are IS the brackets are just from some scrap steel I had lying around.
Japspec Good calcs I got the car redynoed and 305 at the feet im have some issues with spark breakdown and afrs in the 10s ill have to fix that and it should be back in the 350s

 

very nice!...

 

Reece I'm about to fly you to NY to install my shifters

 

Very nice touch on the paddle shifters. I would so do this if I had e-shift on mine