Earl's Solobleed for RC F and GS F
04-20-18, 09:59 PM
#1
Tech Info Resource
Thread Starter
iTrader: (2)
Earl's Solobleed for RC F and GS F
The bigger Brembo caliper uses the same bleeders as the IS F. I discovered this tonight when I replaced the pads on the GS F.
Anyone who tracks their car will spend a lot of time bleeding brakes. Here's what you need to know:
Package and both valves
Part Number
Side by Side views
I will buy these next week and install them. I want to do a full brake system flush anyway, so this will make it a one person job instead of two. I had to call a friend tonight to get the front brakes bled. Definitely don't want to have to do that again.
Anyone who tracks their car will spend a lot of time bleeding brakes. Here's what you need to know:
Package and both valves
Part Number
Side by Side views
I will buy these next week and install them. I want to do a full brake system flush anyway, so this will make it a one person job instead of two. I had to call a friend tonight to get the front brakes bled. Definitely don't want to have to do that again.
The following users liked this post:
ModInJapan (05-03-18)
05-01-18, 04:17 PM
#2
Tech Info Resource
Thread Starter
iTrader: (2)
Installed them today. Perfect fit. The only difference is the hex is 11mm not 10mm.
07-19-18, 11:53 PM
#3
The bigger Brembo caliper uses the same bleeders as the IS F. I discovered this tonight when I replaced the pads on the GS F.
Anyone who tracks their car will spend a lot of time bleeding brakes. Here's what you need to know:
Package and both valves
Part Number
Side by Side views
I will buy these next week and install them. I want to do a full brake system flush anyway, so this will make it a one person job instead of two. I had to call a friend tonight to get the front brakes bled. Definitely don't want to have to do that again.
Anyone who tracks their car will spend a lot of time bleeding brakes. Here's what you need to know:
Package and both valves
Part Number
Side by Side views
I will buy these next week and install them. I want to do a full brake system flush anyway, so this will make it a one person job instead of two. I had to call a friend tonight to get the front brakes bled. Definitely don't want to have to do that again.
07-20-18, 09:07 PM
#4
Tech Info Resource
Thread Starter
iTrader: (2)
Thread
Thread Starter
Forum
Replies
Last Post
SNiiP3R
GS - 3rd Gen (2006-2011)
32
06-28-11 10:08 AM