Liquid Platinum “Take 2”
11-16-17, 05:12 PM
Pole Position
Join Date: Jan 2016
Location: Texas
Posts: 369
...Thinking doing the same...But Painter stated it may Crack...
11-16-17, 05:17 PM
Lead Lap
Thread Starter
Join Date: Jan 2013
Location: CA
Posts: 660
Quote:
Originally Posted by
finny76
Why not put PPF on the CF pieces?
Good question! Honestly, never even crossed my mind.
Really the front lip would be taking the most road rash. Once it gets scraped on the bottom I wonder how it would hold up?
Never to late!!
11-16-17, 05:25 PM
Lead Lap
Thread Starter
Join Date: Jan 2013
Location: CA
Posts: 660
Quote:
Originally Posted by
16GSF00336
...Thinking doing the same...But Painter stated it may Crack...
I don't think so. Considering they usually come cleared new. Just make sure to chose a quality shop that uses quality clear. We used Sikkens on ours
I have done a few for myself and had friends do theirs. Never had any issues with cracking
11-17-17, 08:15 AM
Instructor
Join Date: Dec 2011
Location: california
Posts: 1,043
Quote:
Originally Posted by
biggame
Good question! Honestly, never even crossed my mind.
On my ISF Toms front I put velcro on the bottom to protect it..Soft side down of course. It worked really well.
The following users liked this post:
11-19-17, 08:11 AM
Intermediate
Join Date: Nov 2016
Location: Ca
Posts: 444
Quote:
Originally Posted by
NotnFsport
On my ISF Toms front I put velcro on the bottom to protect it..Soft side down of course. It worked really well.
that’s a great idea!!!!! Big props!!!
11-20-17, 05:55 PM
Advanced
Join Date: Apr 2014
Location: DFW
Posts: 621
NOVEL for GSF
Quote:
Originally Posted by
biggame
Unfortunately, we were missing a couple couplers so, we could only install the headers at this point. As you can see the stock headers are very restrictive compared to the Novel
headers. The install was easier than expected. Don't get me wrong it wasn't a walk in the park either
https://youtu.be/tGuT41BjIlQ
Cant wait to here a clip AFTER FULL NOVEL system Install.
11-27-17, 08:47 AM
Lead Lap
Thread Starter
Join Date: Jan 2013
Location: CA
Posts: 660
The following 3 users liked this post by biggame:
11-27-17, 08:48 AM
Lead Lap
Thread Starter
Join Date: Jan 2013
Location: CA
Posts: 660
Ok, exhaust valves are a must!! lol..With exhaust valve closed it's quiet with a taste of nasty. Open and it's all business!! All I can say is "WOW"
11-27-17, 08:53 AM
Advanced
Join Date: Apr 2014
Location: DFW
Posts: 621
DANG! I have to GET this EXAHUST!!!!!!!!!!!!
11-27-17, 10:38 AM
Rookie
Join Date: Oct 2017
Location: TX
Posts: 65
Quote:
Originally Posted by
biggame
this video clip is with or without novel headers?
11-27-17, 01:34 PM
Instructor
Join Date: Dec 2011
Location: california
Posts: 1,043
11-27-17, 03:24 PM
Lead Lap
Thread Starter
Join Date: Jan 2013
Location: CA
Posts: 660
Quote:
Originally Posted by
DennisGSF
this video clip is with or without novel headers?
Yes, this is the headers back, full exhaust
11-27-17, 03:36 PM
Lead Lap
Thread Starter
Join Date: Jan 2013
Location: CA
Posts: 660
Something to mention! With the Novel exhaust system you won't get a check engine light
The following users liked this post:
11-27-17, 03:51 PM
Rookie
Join Date: Oct 2017
Location: TX
Posts: 65
Quote:
Originally Posted by
biggame
Yes, this is the headers back, full exhaust
Curious to see the dyno numbers with this setup!
The following users liked this post:
11-28-17, 03:42 AM
Pole Position
Join Date: Jan 2016
Location: Texas
Posts: 369
Agreed...100%
Quote:
Originally Posted by
DennisGSF
Curious to see the dyno numbers with this setup!
...Thinking doing the same...But Painter stated it may Crack...
11-19-17, 08:11 AM
NOVEL for GSF
