Warning John Perez from Chicago Composites, Carbon Guards, Shadowcraftusa is a Scam!
#31
Intermediate
iTrader: (16)
Installed them over the weekend after applying some tire graphene coating and they did their job of preventing tire sling.
If considering purchasing, I suggest version 2 if you have wider wheel/tire setup as I run 20x10/11 F/R. Narrower version 1 is probably okay with OEM wheels.
Pre-cut holes is on point with the OEM mounting points. Fronts are mounted using the fender liner clips/bolt while the rears can just be attached with double sided tape, but I opted for the included screws as I didn't want the white color from the bumper to show through.
If considering purchasing, I suggest version 2 if you have wider wheel/tire setup as I run 20x10/11 F/R. Narrower version 1 is probably okay with OEM wheels.
Pre-cut holes is on point with the OEM mounting points. Fronts are mounted using the fender liner clips/bolt while the rears can just be attached with double sided tape, but I opted for the included screws as I didn't want the white color from the bumper to show through.
Thread
Thread Starter
Forum
Replies
Last Post