When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm looking to buy a set of rims in a couple of weeks. I remember seeing someone here with a 10inch all around setup but I cant find it anymore. This is my daily driver and my show car at the same time. I wanted to do something different that most people don't have in my area. If you guys could help me out and letting me know the proper offset. I will be lowering her on either tanabe or swift springs. I'm debating on the black wheel but I cant find too many black gs350 with black wheels.
Niche Verona! Not a bad wheel for the price. Unfortunately, these only come in the 20x10 +40 and will most likely not clear the brake caliper in the front at such a high offset.
ok thanks for the info I will have to look into those. I'm sure I will have to roll the fenders will I have to do anything else?
Definitely get that little lip in the rear folded in as best as you can and those fender liner tabs on the front fender. Probably add in some negative camber and run a 245/35/20 all around to help with some of that clearance.
Here it is mounted on Vertini's GS350 on air suspension. I believe he got his fenders pulled out a little too.
These are 22" Forgiatto's but they're black...you get the picture lol best of luck. Post pix when you've made your decision...
Ok thanks besides them being 22s the color actually does look good. I will definitely post pics once I figure out what I'm going to do. This has been a hard decision.
04-06-17, 10:28 AM
10 inch Squared
