GS-F Underbraces, does anybody know if they fit GS350?
#1
Driver School Candidate
Thread Starter
Join Date: Feb 2013
Location: WA
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
GS-F Underbraces, does anybody know if they fit GS350?
http://lexusenthusiast.com/2015/10/1...-drive-review/
3/4 way down the article, there's a picture titled "Strength and Rigidity" showing there are 4 braces that are bolted on to the GS-F for additional rigidity..
They are the Front Brace, Tunnel Brace, Trapezoid Brace and Rear Body Brace.
Does anyone in the forum have access to getting part number for these?? More interesting would be if anybody can confrim whether this will fit 2013 GS350F?
I am interested in getting these for my car as my last gen 1 IS300 benefited greatly back in the day when TOMS/TRD make these for the SXE10 chassis!
Any help would be much appreciated..
3/4 way down the article, there's a picture titled "Strength and Rigidity" showing there are 4 braces that are bolted on to the GS-F for additional rigidity..
They are the Front Brace, Tunnel Brace, Trapezoid Brace and Rear Body Brace.
Does anyone in the forum have access to getting part number for these?? More interesting would be if anybody can confrim whether this will fit 2013 GS350F?
I am interested in getting these for my car as my last gen 1 IS300 benefited greatly back in the day when TOMS/TRD make these for the SXE10 chassis!
Any help would be much appreciated..
#2
Lexus Test Driver
I'm just guessing, but I bet they will fit with some tweaking. The exhaust is probably larger on the GSF along with some other random bracing and reinforcements in the chassis, which may impact fitment. Totally guessing of course.
#3
I would say it should fit. I did see another member on here used a GS350 Apexi Midepipe and GSF mufflers on his 2016 GS350 Sport. If exhaust and midepipes are all the same, I can't imagine how much different can the chassis be. But then again the car was built to hold a V8 instead of a V6 pushing out over 100+ horsepower compared to a reg GS350.
#4
Driver School Candidate
Thread Starter
Join Date: Feb 2013
Location: WA
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
I am guessing it would fit as well.. hopefully with little or no mods.. Would anybody have access to the part numbers so that we can actually source these things??
#5
Driver School Candidate
I have a 2016 GS350 F Sport, and it has a trapezoid brace. So I would assume it'd fit.
not sure if it had any of the other braces though, only saw it because I had to take it off when I switched out the exhaust
not sure if it had any of the other braces though, only saw it because I had to take it off when I switched out the exhaust
Thread
Thread Starter
Forum
Replies
Last Post