When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
big... every time i see tjhis pic of your car i am like wow.. this is a beauty... if you do not mind, what was the cost to black out your chrome? Also I just noticed that the area where you inserted your Apexi controller you must have customized it? Thank you for your time to make these mods, upload the great results and provide feedback! Also do you feel like the Apexi controller does anything?
Blacking out the trim is going to vary from body shop to shop. I personally had all pieces removed and prepped before painted. To ensure best look/adhesion.
The Apexi throttle controller was installed without any modification. Very easy to install. In my opinion, & a must have for car enthusiasts. It offers you 7 different modes w/led changing color
with each mode selected.
Blacking out the trim is going to vary from body shop to shop. I personally had all pieces removed and prepped before painted. To ensure best look/adhesion.
The Apexi throttle controller was installed without any modification. Very easy to install. In my opinion, & a must have for car enthusiasts. It offers you 7 different modes w/led changing color
with each mode selected.
Ah thank you for your time do you notice the difference with the 7 different modes towards acceleration? thank you again!
Very nice looking car and Congrats! I had a 2014 GS 350 F Sport and looking at how it evolved in 2 years is amazing. The 2016 definitely looks much better!
After lowering her, we went ahead and did the alignment. You can see the before measurements
as well as the after. We were unable to get the Rt front camber in specs at this time.
Will do a follow up alignment once things settle down.
is it the upper control arm the issue?I am getting mine done tomorrow , I will text you let you know how it is.
Not 100% sure @ this point. I figured I would let everything settle, then do another alignment.
Let me know how your's turn out after you align Tomorrow
It's real easy! Open the glove box, then remove the front dash panel #5 from the diagram. (Installed with clips) Just slightly pull from glove box opening, working your way around. Then remove the lower 2 screws from the radio & then it should pull straight out. I would put a towel on your center console to protect it. Then remove the harness plug and install..
Do you tuck the PS unit behind the dash as well? I would imagine it would be a little tight no?
big I forgot to ask did you use any spacers for when you used the springs?
I definitely plan to install those cameras just in case of any future hit and runs
Do you tuck the PS unit behind the dash as well? I would imagine it would be a little tight no?
Yes, it's tucked behind the radio. You have to make sure you don't catch any wires when you re install the radio
Originally Posted by SRC350F
big I forgot to ask did you use any spacers for when you used the springs?
I definitely plan to install those cameras just in case of any future hit and runs
04-26-16, 09:43 AM
do you notice the difference with the 7 different modes towards acceleration? 
