0mghi2u

iTrader: (3)

hope this helps i thought since no one had a diy other then just explaining it i would try to make one.. if you have any questions PM me..

0mghi2u

iTrader: (3)

when putting it back together just make sure the puddle light housing is in the correct place and the turn signal housing piece put back in the correct spot.. then put the black cover piece back on and make sure it all fits in without gaps.. if there is a slight gap on top and outer side towards the led turn signal ur fine cuz when you screw it in the gap will close up.. the puddle light housing has this white tab and the black cover housing has a opening for the black tab just make sure the white tab fits inside the black cover housing before tightening it all up... then when all done push the bottom mirror back in place first then the tops..and your all done.. ENJOY. hope this helped...

SoCal1984

Excellent post.

Any chance of getting a night shot or a shot in the garage to see how much more light it produces?

sydtoosic

thanx man,,, there are plenty of members that are going to appreciate this. great job.

0mghi2u

iTrader: (3)

i'll take one tonight

rominl

iTrader: (4)

excellent diy!!!!!! thank you for posting!

0mghi2u

iTrader: (3)

yeah i figured it be good to make a diy since im taking it all apart.

bigblack06

iTrader: (20)

Was waiting to see when this would be done. Gonna try to do this, this weekend.

natnut

Thanks for your contributions. This should be part of a stickied DIY thread.

0mghi2u

iTrader: (3)

how do i add it there?

natnut

Ask a moderator to sticky it .

mso4

iTrader: (1)

You are freaking awesome!! Thanks for this

My '07 BMW had LED puddle lamp and it looked awesome when I open the door at night. Can't wait to do this

Mi1lion

Nice, now make one for the reverse lights. Pretty pleaseeeee

0mghi2u

iTrader: (3)

phone camera sucks.. but here are some pics at night.. trust me they are bright and project pretty well on the ground.. but not as bright has the original bulb

0mghi2u

iTrader: (3)

reverse lights are realllll easy...

open the trunk.. if u look at the inner upper trunk lid you will see those little plastic push clips.. take a pair of pliers or flat head and pull them off.. you don't have to take all of them off just the ones around the taillights.. then you will see the reverse light bulb socket.. pull it out install new led and push the pins back in and your done..



***if you reallllly can't figure it out let me know.. i'll make a quick diy******