4th Gen GS Aftermarket Wheel Thread
#557
Lexus Test Driver
I am running 19x9 front 38 ET with 245-40-19 and the rears 19x10 45 ET 275-35-19 lowered on Tanabes, no rub anymore , I will post pics next week after a good wash.
The following users liked this post:
Lucy99 (07-06-17)
#558
Driver School Candidate
Lol that is funny, but yes I will def be getting the Rohana's I'm just doing a little homework on the tires that I want. I think, no hard feelings now, l am going to buy them at discount tire since they will be able to swap them from side to side for tire max tire life since im going the staggered route. If I get a great deal for being a member of the same form as you let me know lol.
#559
Former Sponsor
iTrader: (2)
Lol that is funny, but yes I will def be getting the Rohana's I'm just doing a little homework on the tires that I want. I think, no hard feelings now, l am going to buy them at discount tire since they will be able to swap them from side to side for tire max tire life since im going the staggered route. If I get a great deal for being a member of the same form as you let me know lol.
Always glad to help out a fellow 4th Gen GS owner being a former owner myself.
The following users liked this post:
Lucy99 (07-06-17)
The following users liked this post:
Atifkhan (08-09-21)
#563
Driver School Candidate
Join Date: Jul 2017
Location: GA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Wheels and suspension
2013 GS350
Concept One CS20 wheels
20X9.0 32mm offset
20X10.5 45mm offset
245/35R20 Nitto Motivo Front / 275/30R20 Nitto Motivo Rear
RSR Super Down Springs w/ SPC camber kit
Last edited by TonyQGS350; 07-10-17 at 11:44 AM. Reason: Wrong Tire Size entered
The following users liked this post:
Atifkhan (08-09-21)
The following users liked this post:
Atifkhan (08-09-21)
The following users liked this post:
Chavez562 (07-10-17)
#567
Driver School Candidate
Join Date: Jul 2017
Location: GA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Concept One CS20 Wheels with super down springs.
-2 degree rear camber, fenders rolled. No rear rubbing.
Occasional front rubbing the inner fender when you hit a large dip in the road.
I'm pleased with the set-up. I've been running it just over 1 year.
-2 degree rear camber, fenders rolled. No rear rubbing.
Occasional front rubbing the inner fender when you hit a large dip in the road.
I'm pleased with the set-up. I've been running it just over 1 year.
#569
Pole Position
Work Gnosis CV201 19"
Would running on these cause rubbing issues with stock springs
19x9.5 + 35 front
19x9.5 + 45 rear
thanks very much in advance guys
Would running on these cause rubbing issues with stock springs
19x9.5 + 35 front
19x9.5 + 45 rear
thanks very much in advance guys
Last edited by Nasrul3698; 08-01-17 at 03:09 AM.
The following users liked this post:
Atifkhan (08-09-21)
#570
The following users liked this post:
Nasrul3698 (08-06-17)