2008GS

Hey guys, I wanted to see if you have a source for aluminum trimmed pedals for the 3rd gen GS cars. I want to dress up the pedals and I am looking for new F-type look but I can't find anything Lexus- branded that would work. Any ideas?
Thanks in advance,
John

RXGS

iTrader: (2)

I got some off eBay that essentially replace the rubber covers for like $25. Look great and fit super well, and look just like the pedals that my IS with a sport package had

2008GS

Thank you for your reply. Do u recall the brand name?
Regards,
John

Vooduguru

Pics or it didn't happen.

wickedtaco

Post a link so we can check those pedals out.

​​​​​​​Cheers

guzzy92fs

I am planning on getting this ones:

http://www.ebay.com/itm/181597895831

Vooduguru

Will those work on 3g?

RXGS

iTrader: (2)

Bad pic, but you get the idea, been raining so they're all dirty

Vooduguru

Very cool

sprtn131

This is what i did... from an IS F-SPORT

sprtn131

I had these previously installed, but wanted more of a legit look. I still have this set. DM if interested

brker1

Nice job look like an F now

2008GS

Sprtn131, a few questions:
What year IS-F Sport will work?
Is it a simple process to remove stock rubber pedals and install IS pedals?
Thank-you in advance,

sprtn131

I believe they are for an 08 but I don't really think it matters, as long as its a second gen IS.

The brake pedal was a little tricky but still pretty easy. Just peal off the old rubber and kinda stretch and peal the new one on. I had to use a pic and a small flathead to get it.

The accelerator pedal was a bit more difficult. The mount is slightly different and I ended up taking out the whole pedal assembly and drilling a new hole in the rod which wasn't too hard but you have to make sure it's strait.

The foot rest was a more of a challenge. Long story short.... I pulled the carpet back, took out the foam support and made some modifications. There was an exacto knife and a can of hardening foam involved.

I got the set new from ebay for around 135$ new from factory. And I'm really happy how it turned out

sprtn131

Here's an updated pic with my new floor mats