Wheel decision
3 Attachment(s)
Hey CL,
So I'm up and down with purchasing my wheels now. I was going to do the XXR 968 ( Work Equip reps ;somewhat) Black Chrome's in a 20x9 +35 and a 20x9 +15 rears. would be perfect fit. But then I was looking into the CL vendor market on here and I couldn't get my eyes off the Rennen CSL 1 Step lip wheels. Questions about them; which I wanted to do from the start were 20x10's all around, now just the matter of offsets. Will 20x10 +35 or 30 fronts and 20x10 +20 in the rears be fine? Much finder works needed? or just shaved? Decisions, Decisions... |
What size tires?
|
Originally Posted by Schmexus
(Post 8399051)
What size tires?
|
Why not run staggered? 20x9 and 20x10?
with 20x10 and 235 series tires you probably going to have some rubbing.. of course if the car is lowered |
Originally Posted by MyIS350G
(Post 8400050)
Why not run staggered? 20x9 and 20x10?
with 20x10 and 235 series tires you probably going to have some rubbing.. of course if the car is lowered |
Originally Posted by ksan
(Post 8400093)
I'm AWD. So I want to do a staggered offset rather staggered wheels..
|
Are you planning on lowering it?
If not, with 20x10 +25 - +30 the wheels will be poking out wider than the fenders. |
Originally Posted by MyIS350G
(Post 8400373)
Are you planning on lowering it?
If not, with 20x10 +25 - +30 the wheels will be poking out wider than the fenders. |
Are the Rennan's forged wheels?
|
Originally Posted by XxGoKoUxX
(Post 8401472)
Are the Rennan's forged wheels?
|
that's awesome! :)
Keep me updated ksan! I can't wait to see it on the car. |
I need to replace two standard wheels on my 2006 GS430. I'm not looking for an upgrade, just want to replace with OEM. Any ideas on my cheapest option?
|
I like both those rims bit with the offsets you mentioned on the rear you will definitely need to do some fender mods.
|
Originally Posted by dzell81
(Post 8463498)
I need to replace two standard wheels on my 2006 GS430. I'm not looking for an upgrade, just want to replace with OEM. Any ideas on my cheapest option?
|
I found a few, and much cheaper than I expected: ~$250/
Thanks |
All times are GMT -7. The time now is 03:19 PM. |
© 2024 MH Sub I, LLC dba Internet Brands