Tips, Tricks, DIY's, & How-To's
#63
Lexus Test Driver
Thread Starter
~attention!!!!~
***TO EVERYONE:***
Please use the "Title" section if you are posting a Tip, Trick, DIY, or How-To. Label what the purpose of the thread is so other fellow CL users can easily distinguish what the post is about and it is much easier to find the use of the thread. this also prevents others from "re-posting" similar posts...
Thank you all for your contributions and keep up the good work! Keep 'em comin' guys!
Please use the "Title" section if you are posting a Tip, Trick, DIY, or How-To. Label what the purpose of the thread is so other fellow CL users can easily distinguish what the post is about and it is much easier to find the use of the thread. this also prevents others from "re-posting" similar posts...
Thank you all for your contributions and keep up the good work! Keep 'em comin' guys!
#64
I can't seem to get it to work
Originally Posted by SGT
1. Make sure the car is in Park and the parking brake is disengaged before you start the car.
2. Start the engine.
3. Engage the parking brake.
4. Fully depress the brake pedal and then release.
5. Fully depress the brake pedal and then release.
6. Disengage the parking brake.
7. Fully depress and hold down the brake pedal.
8. Engage the parking brake, the disengage it (while holding down the brake pedal).
9. Engage the parking brake, the disengage it (while holding down the brake pedal).
10. Release the brake pedal.
11. Engage the parking brake.
12. Fully depress the brake pedal and then release.
13. Fully depress the brake pedal and then release.
* When the "Check VSC" icon is displayed in the multifunction display along with the "Trac-off" icon indicator, you'll know that you have successfully complete the procedure! Your car is transformed!
*** One the car is started you have 30 seconds to complete the process. With practice, the procedure can be completed in app. 15 seconds, unfortunately, must be repeated each time the car is switched off (all systems are returned back to normal).
2. Start the engine.
3. Engage the parking brake.
4. Fully depress the brake pedal and then release.
5. Fully depress the brake pedal and then release.
6. Disengage the parking brake.
7. Fully depress and hold down the brake pedal.
8. Engage the parking brake, the disengage it (while holding down the brake pedal).
9. Engage the parking brake, the disengage it (while holding down the brake pedal).
10. Release the brake pedal.
11. Engage the parking brake.
12. Fully depress the brake pedal and then release.
13. Fully depress the brake pedal and then release.
* When the "Check VSC" icon is displayed in the multifunction display along with the "Trac-off" icon indicator, you'll know that you have successfully complete the procedure! Your car is transformed!
*** One the car is started you have 30 seconds to complete the process. With practice, the procedure can be completed in app. 15 seconds, unfortunately, must be repeated each time the car is switched off (all systems are returned back to normal).
#66
nav and phone override
Hi there!
Does anyone have any idea why I can not enter the hidden menu where the override feature can be enabled? I've tried it in motion, stopped, engine shut, ignition on but nothing. I press the menu-volume-upleft-down left, upleft-down left corners and nothing happens.
I have a GS 300 manufactured in 8/2005.
Any advice would be appreciated.
thx
Does anyone have any idea why I can not enter the hidden menu where the override feature can be enabled? I've tried it in motion, stopped, engine shut, ignition on but nothing. I press the menu-volume-upleft-down left, upleft-down left corners and nothing happens.
I have a GS 300 manufactured in 8/2005.
Any advice would be appreciated.
thx
#67
Lexus Test Driver
Thread Starter
TPMS Sensor
Originally Posted by john37
Does anyone know how to get rid of the tire pressure sensor warning?
#68
Lexus Test Driver
Thread Starter
Originally Posted by szilu
Hi there!
Does anyone have any idea why I can not enter the hidden menu where the override feature can be enabled? I've tried it in motion, stopped, engine shut, ignition on but nothing. I press the menu-volume-upleft-down left, upleft-down left corners and nothing happens.
I have a GS 300 manufactured in 8/2005.
Any advice would be appreciated.
thx
Does anyone have any idea why I can not enter the hidden menu where the override feature can be enabled? I've tried it in motion, stopped, engine shut, ignition on but nothing. I press the menu-volume-upleft-down left, upleft-down left corners and nothing happens.
I have a GS 300 manufactured in 8/2005.
Any advice would be appreciated.
thx
did you follow the intructions exactly? Sansei has a similar production date and his works... sometimes i have to repeat the process if i do it too fast... sorry not being very helpful...
#69
override menu
Originally Posted by Eternity3G
??? weird ???
did you follow the intructions exactly? Sansei has a similar production date and his works... sometimes i have to repeat the process if i do it too fast... sorry not being very helpful...
did you follow the intructions exactly? Sansei has a similar production date and his works... sometimes i have to repeat the process if i do it too fast... sorry not being very helpful...
#72
Driver School Candidate
Join Date: Jun 2006
Location: tx
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
The seat belt mod won't cooperate.
I tried the initial instructions over 5 times then read through the entire thread and saw the amendment. Still nothing,here is what IM doing, is this right.
1. get in car
2. hit start butoon twice w/out brake
3. select trip B with (odo trip) button
4.push and hold (odo trip) for more than ten seconds
5. put on seat belt
Anyone that got this to work please let me know whatIm doing wrong.
1. get in car
2. hit start butoon twice w/out brake
3. select trip B with (odo trip) button
4.push and hold (odo trip) for more than ten seconds
5. put on seat belt
Anyone that got this to work please let me know whatIm doing wrong.
#73
Originally Posted by szilu
As the process is not that complicated and I have tried it several times I think I did it right. I will try it slower (athough I was in no hurry before)...
#74
Lexus Test Driver
Thread Starter
Originally Posted by Valet Park
I tried the initial instructions over 5 times then read through the entire thread and saw the amendment. Still nothing,here is what IM doing, is this right.
1. get in car
2. hit start butoon twice w/out brake
3. select trip B with (odo trip) button
4.push and hold (odo trip) for more than ten seconds
5. put on seat belt
Anyone that got this to work please let me know whatIm doing wrong.
1. get in car
2. hit start butoon twice w/out brake
3. select trip B with (odo trip) button
4.push and hold (odo trip) for more than ten seconds
5. put on seat belt
Anyone that got this to work please let me know whatIm doing wrong.
#75
Driver School Candidate
Join Date: Jun 2006
Location: tx
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Ok, just tried it again and nothing, I must be very slow. What about this, when I select the Odometer, you have to push it once more to hold ten seconds then the display changes to Trip A.
Or should I select ODO and hold? Im going to try that and see if that works.
Or should I select ODO and hold? Im going to try that and see if that works.