|
How to install the Front Bumper Clear SideMarkers on 98 GS4??
Hi! How do i install the new front clear sidemarkers? do i have to take apart the wheelwell to get the yellow sidemarker to pop out? thanks!
|
the easiest way to do the job is to remove your fog lights. Do a search and you will find several threads on how to....while your changing out the side markers, you might want to change the bulbs as well... Good luck....
|
ya what he said ,its 10mm bolts 2 remove... good luck, post it when it changed ,,,
|
if you can't figure how to open your foglight, then see the instruction on my webpage
|
Anh I think he is talking about the side markers.
|
You can also remove them by pulling back the wheel well inside plastic cover. Remove a couple of the screws holding down the cover and it should loosen enough for you to get your hand in there and remove the bolts securing the side markers.
|
hey guys. thanks for all the help. actually just got the car today during my lunch time. It finally came! I put in the clear lens, and i also will post pix tomorrow...after i wash it!
|
alright, congrats man... can't wait 2 c her..
|
I could not figured out how to open the foglight to get accesss for the side marker either (RMM bumper)
that is why I follow this method ==> You can also remove them by pulling back the wheel well inside plastic cover. Remove a couple of the screws holding down the cover and it should loosen enough for you to get your hand in there and remove the bolts securing the side markers. |
1 Attachment(s)
hey guys...got it done. I did it by using the wheel well. seemed easier too me :) Thanks! also, i posted pics of our car...since we got it yesterday!
https://www.clublexus.com/forums/sho...739#post667739 |
Originally posted by koreanpers hey guys...got it done. I did it by using the wheel well. seemed easier too me :) Thanks! also, i posted pics of our car...since we got it yesterday! https://www.clublexus.com/forums/sho...739#post667739 |
no, they dont pop out. there is 2 ten mm nuts that hold them in place. you have to remove those first.
|
looks good! nice and clean. Keep those mods coming :D
|
Which replacement bulbs do you guys use for these side markers? I've seen some pictures where the bulb looks blue (i'm assuming the light is white-ish), but I don't know exactly which bulbs. Any help would be appreciated, thanks!
- Patrick |
hi. i used the polarg m-4 bulb. its the wedge 194 bulb. found on ebay all the time:) it comes out as pure white when on.
|
| All times are GMT -7. The time now is 02:36 AM. |
© 2024 MH Sub I, LLC dba Internet Brands