Would this shifter knob fit a '01 GS300?
#1
Instructor
Thread Starter
Would this shifter **** fit a '01 GS300?
https://www.amazon.com/Birds-Leather-TOYOTA-Landcruiser-RX450h/dp/B01IM1SAZA/ref=pd_cp_263_3?_encoding=UTF8&pd_rd_i=B01IM1SAZA&pd_rd_r=JH6A28BY2P8C0CZR4SHZ&pd_rd_w=J6KlF&pd_rd_wg=z80nU&psc=1&refRID=JH6A28BY2P8C0CZR4SHZ
The description says it would fit a GS300 but the list of applicable models does not list it. Does anyone know if this **** would fit?
#2
Yeah I just bought one of the same brand, just in a different color combo. I think it has plastic threads inside as it doesn't really tighten down well like the OEM one. I'm going to Loctite it when I get a chance.
#7
Instructor
Thread Starter
I don't think I would locktite it. I'm pretty sure locktite melts plastic but you should double check that. I just remember when I was dealing with my center console being loose and on the DIY thread someone tried to locktite the bolts into the plastic console and it ruined it.
Trending Topics
#8
Racer
iTrader: (14)
I have the OEM one off my 98 GS400 if anyone's interested. PM with a number and I'll text you pics. Guaranteed to fit since it's off my 2GS.
Some pics in the link below, but I have since cleaned it up a bit. Has the wear around the edges of where the leather and wood meet, but still in better condition than most. Ebay sells the OEM 2GS ones for like $80 iirc.
https://www.clublexus.com/forums/2ge...trunk-bar.html
Some pics in the link below, but I have since cleaned it up a bit. Has the wear around the edges of where the leather and wood meet, but still in better condition than most. Ebay sells the OEM 2GS ones for like $80 iirc.
https://www.clublexus.com/forums/2ge...trunk-bar.html
Thread
Thread Starter
Forum
Replies
Last Post
phatz
GS - 2nd Gen (1998-2005)
7
05-06-09 10:52 AM