When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Others say it is a throttle body code and have subsequently fixed it by replacing the throttle body and/or calibrating the adjustment idle screw or tps sensor
I had my ABS ECU taking out maybe thats what causing the code I may install it back on and see if that code still comes back on....
It's your wiring for sure, your ECU doesn't know what is happening with the RPMS so it can't calculate fuel/timing aka limp mode. It is either a misplaced/spliced wire or not connected-all-the-way plug
It's your wiring for sure, your ECU doesn't know what is happening with the RPMS so it can't calculate fuel/timing aka limp mode. It is either a misplaced/spliced wire or not connected-all-the-way plug
Can it be my MAF sensor not probably working correctly ? because I have the MAF Sensor connected on the intake pipe right in front of my Single Turbo inlet.....