Need help finding part number
#1
Driver School Candidate
Thread Starter
Need help finding part number
I cleaned out the air mix path on my throttle bidy, the gasket was brittle and it broke, i am having a hard time finding the part # any help would be appreciated.
#2
Intermediate
iTrader: (4)
Sorry but unfortunately neither the idle air check mix plate nor the gasket are sold separately on any 2GS. I went through this same ordeal when I took mine off to metal etch and paint my L logo. I was very nervous about messing the metal plate up because I'd have to buy a whole used throttle body to get that one plate. My gasket ripped too, but I just got some rubber/paper gasket material from the auto parts store, traced the plate, and dremeled two small holes with a small drill bit where the bolts go.
The following users liked this post:
BigTurtle (06-20-17)
#3
Lexus Test Driver
iTrader: (8)
I found this in the classifieds:
https://www.clublexus.com/forums/2gen-gs430-400-300-classifieds-98-05/772781-polished-throttle-body-no-sensors-150obo.html
https://www.clublexus.com/forums/2gen-gs430-400-300-classifieds-98-05/772781-polished-throttle-body-no-sensors-150obo.html
#4
Driver School Candidate
Thread Starter
Sorry but unfortunately neither the idle air check mix plate nor the gasket are sold separately on any 2GS. I went through this same ordeal when I took mine off to metal etch and paint my L logo. I was very nervous about messing the metal plate up because I'd have to buy a whole used throttle body to get that one plate. My gasket ripped too, but I just got some rubber/paper gasket material from the auto parts store, traced the plate, and dremeled two small holes with a small drill bit where the bolts go.
Thread
Thread Starter
Forum
Replies
Last Post
Miguelrey
IS - 2nd Gen (2006-2013)
8
01-12-16 07:01 PM
shadowless
ES - 1st to 4th Gen (1990-2006)
5
09-15-06 05:20 PM