Hi, new here trying to get help with wheels. I need help with fitment to be precise, looking for work meisters s1 3p wheels 18x9/9.5 - 18x10/10.5 for my gs300. Needs to be able to clear bbk in the front

 

First, Welcome to the forum and the club.
Second, In which part of Fl. you are locared?
Third, See this link for reference; http://www.rimtuck.com/search/datash...98&yearto=2005
Good luck.

 

You should be able to clear the 9.5 easy......depending on your offsets. But trying to clear a 10.5 in the rear may be tough. Your rear needs to be at about +17 with maximum stock - camber and a minor shave and roll. If your rear offset is more like +25 or greater on that 10.5 your chances of clearing will be greater and less fender work to do.

 

located in Pembroke pines and thank you

 

Thanks for the advice, the offset is killing me i want like a 3-3.5 inch lip on the front and a 4-4.5 rear and i cant seem to find anyone who knows what offset would work.

 

OP are you ordering a new set from work wheels? Or are you shopping around the forums and Craigslist for a set? Finding an available set in the specs you want will be very slim. You are better off ordering a new set with your precise specs.