help! Broken oxygen sensor connector (female end, Bank 1 sensor 2)
My oxygen sensor (bank 1 sensor 2 ) connector (female connector, engine/ecu side) is cracked and the wires pulled out. I tried to source this from a junkyard but no one around me (LI, NY) seems to have the car.
Any ideas on where I can get a replacement connector to splice in? |
The part number is 90980–11028, you can get one from any Lexus or Toyota dealer for less than $10.
|
Originally Posted by iToaster
(Post 8543335)
The part number is 90980–11028, you can get one from any Lexus or Toyota dealer for less than $10.
|
It's just the plastic housing. You should be able to remove the pins from your old connector and reuse them if they are undamaged. If you need them, 82998-12440 is the part number for the wires with the female pins on the end of them for that connector, but you would need four of them and they're each almost as expensive as the plastic connector.
|
Originally Posted by iToaster
(Post 8543456)
It's just the plastic housing. You should be able to remove the pins from your old connector and reuse them if they are undamaged. If you need them, 82998-12440 is the part number for the wires with the female pins on the end of them for that connector, but you would need four of them and they're each almost as expensive as the plastic connector.
|
Originally Posted by AndrewG
(Post 10009792)
82998-12460 is the part number for the gold plated pins. 82998-12440 is for the silver pins. Hope this helps.
Originally Posted by StarGS3
(Post 8543312)
My oxygen sensor (bank 1 sensor 2 ) connector (female connector, engine/ecu side) is cracked and the wires pulled out. I tried to source this from a junkyard but no one around me (LI, NY) seems to have the car.
Any ideas on where I can get a replacement connector to splice in? |
All times are GMT -7. The time now is 04:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands