When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'd go with the shiny green tint.. If you can get a hold of regular chrome bezel.. That would be better.. Too much darkness going on IMO. If you do go with the SD bezel, you mighty as well black out your tailights. =X
I'd go with the shiny green tint.. If you can get a hold of regular chrome bezel.. That would be better.. Too much darkness going on IMO. If you do go with the SD bezel, you mighty as well black out your tailights. =X
Yup, going with green. I have the regular chrome bezel too.. but not using it.
I like the green.
Yup no problem... I found it in the diy section last year. When i first joined i read every single diy thread even though some were over my head. This one is straight forward. There r two ways to get to the bolt on the bottom of the headlight. I only use and recommend the one going through the fender plastic. This takes less than 20 min total. U dont have to unscrew any bumper bolts. I think these show that step of taking one out the bumper but u dont have to. Start with the bolt on the bottom of the headlight first.
10-28-12, 09:19 PM
