ClubLexus - Lexus Forum Discussion

ClubLexus - Lexus Forum Discussion (https://www.clublexus.com/forums/)
-   GS - 2nd Gen (1998-2005) (https://www.clublexus.com/forums/gs-2nd-gen-1998-2005-184/)
-   -   SSR LM-9 - Thoughts and opinions? (https://www.clublexus.com/forums/gs-2nd-gen-1998-2005/550122-ssr-lm-9-thoughts-and-opinions.html)

UpstateLex 01-30-11 06:42 PM

SSR LM-9 - Thoughts and opinions?
 
1 Attachment(s)
What up CL, thinking about copping the SSR LM-9s so that when summer arrives I'll finally have a set of wheels to put on my baby. It's been a long time coming as this will be my 3rd summer with the GS. What are y'all thoughts and opinions on these? I saw these on one of the dude from Hawaii's LS in super black coat and fell in love. I'm usually for a more full faced type of wheel but these aren't hella expensive. I'm lowered on BC-R coils. Any idea on what type of offset I would want to run if I'm looking to be somewhat close to flush but not need any fender work? Anyone ever seen these on a GS? post pics if ya have.

(I want to run 18's i guess, link is included as to what specs they have in stock.. don't think I'd wanna wait to get custom offsets. Thanks in advance y'all)

http://www.ssr-wheels.com/wheels/lm9_20.asp

AZTurbo 01-30-11 06:56 PM

I would run 19" x 9.5" Normal Disk +30 or Super Low Disk + 30 for the front and a 19" x 10" Super Low Disk +37 for an aggressive fitment. Definitely one of my favorite wheels; so much that I have them on my IS! :) 18's are pretty small on a 2GS unless you want a much aggressive look.

ThomasGS4 01-30-11 07:03 PM

Those wheels are hot. :)

djMaru 01-30-11 07:15 PM

so dang hot wheels. :thumbup:

4ntvings 01-30-11 09:14 PM

w/kit get 20s
w/out kit get 19s

love the wheels. they were on my list with the vsxx and a few others.

TYPEII 01-30-11 09:25 PM

Love mesh rims, they look sick when spinning. Go at least 19", If it was me 20"...

jiwonman 01-30-11 10:11 PM

These are nice wheels for sure.

Lextasy671 01-31-11 02:11 AM

uhh..that pic..that's an M45. hmmm, id go with 19x9 n 19x10...offsets, it depends if you wanna go aggressive or safe side...

UpstateLex 01-31-11 04:29 AM

I'd rather not have to roll or pull the fenders. but something that ain't sunk like stock wheels

UpstateLex 01-31-11 07:34 PM

anyways, im looking at 18 x 9 +37 18 x 10 +24.. got a quote from FX auto. any other places i should check out before i go ahead and buy? thoughts on offset... decent? if I have to wait for a couple months should i go custom?

kit cat 01-31-11 07:46 PM

I so wanted those wheels ...and still kinda do.

AZTurbo 01-31-11 07:52 PM


Originally Posted by UpstateLex (Post 6110006)
anyways, im looking at 18 x 9 +37 18 x 10 +24.. got a quote from FX auto. any other places i should check out before i go ahead and buy? thoughts on offset... decent? if I have to wait for a couple months should i go custom?

Are you going to run a Normal Disk up front and a Super Low Disk in the rear? What finish do you want?

UpstateLex 02-01-11 04:54 AM

i'm thinkin either super black coat or the flat black. the flat black is the one in the pic above. what would i need to run to clear bbk?

97sc300t 02-01-11 07:59 AM

They look good-but it would be vey important to have a deep dish-makes the car have a better stance

ALLBLACKGS 02-01-11 09:35 PM

those are sick!


All times are GMT -7. The time now is 10:16 PM.


© 2024 MH Sub I, LLC dba Internet Brands