My SBM on BC racing extreme drop coils with rca's.
#1
Driver School Candidate
Thread Starter
iTrader: (2)
Join Date: Mar 2010
Location: MD
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
My SBM on BC racing extreme drop coils with rca's.
Sorry for the crappy pic but I wanted to show you guys the BC racing extreme drop coils will lower the car plenty over the standard BC racing coils. The coils are all the way UP with front and rear rca's. Rims are 19x9 235 35 f and 19x10 275 30 r. Still have to get some spacers and an alignment.
Trending Topics
#11
Master Thread Closer!!
iTrader: (33)
Join Date: Jul 2002
Location: Waipahu, Waikele, HI
Posts: 9,859
Likes: 0
Received 9 Likes
on
9 Posts
Nice drop with the RCAs....it provides max piston travel...and lessens the stress to your seals.
So looks like without the RCAs...you will have about 1 finger gap with the coils all the way up?
So looks like without the RCAs...you will have about 1 finger gap with the coils all the way up?
#13
Driver School Candidate
Thread Starter
iTrader: (2)
Join Date: Mar 2010
Location: MD
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Not sure on the spring rates but they are softer than the spring normally offered on this drop. I put some miles on the setup yesterday and the upper control arms hit on big bumps even after I adjusted the front dampening full hard. I think I'm going to remove the front rca's which should give me around 3/4 of an inch of height.
#14
looks nice! i have ordered BCR custom to go low! wonder if its this setup i will get! he asked me how much i wanted the lowest to be i said 150mm so i hope my UP setting will be good for daily driving.. Any pics without rca?