wheel guru's chime in.
 

ok so i'm thinking of ordering some ssr professors.
coming from the 240 scene, i want to have my wheels as agressive as possible with maximum lip.
the sizes i were looking at were 19x10+11 sl disk//19x11+11 sl disk
would these sizes be able to fit under stock fenders on a GS2 with minor work
roll and a bit of pull? i am not too familiar with the GS2 offsets.

i was thinking of running 235/35 up front and 255/30 rear.
any advice would be appreciated thanks!

hmm thats a question more fit for vipstylecars.com
i've seen those type of offsets, even negative work. but they r on LS's
go research their wheel fitment thread

hmm will do thanks. btw aren't you on zilvia? i'm 99maxgtr on there.

rimtuck.com is your friend

yeah i've been on rimtuck but all the 2gs i've seen on stock body run pretty conservative offsets compared to what i'm looking at which makes me wonder how much work i am going to need to pull of this look.

i don't want to run more than 3-4 of camber b/c i hate that look.
i guess i just need to be the first to run it on stock body and make it work.

Lexus GS300 Front :19x10.0 -25 Offset 225/35 Rear:19x12.0 -25 Offset 255 / 35
http://www.rimtuck.com/photos.php?ph...jpg&id=449&h=3

It seems a little more aggressive than you want lol

Minor pull or aggressive camber (or a mix of both) with those specs.

19x11.0 +15 19x12.0 +15
http://www.rimtuck.com/photos.php?ph...jpg&id=995&h=1
http://www.rimtuck.com/photos.php?ph...jpg&id=995&h=2
http://www.rimtuck.com/photos.php?ph...jpg&id=995&h=3

My suggestion just buy the wheels and make it fit. Thats usually the case. and if you're front the 240 crowd then you should be no stranger to rolling, pulling and camber

yeah that's what i'm probably going to do. haven't decided 100% if i want to drop all that dough on new wheels and have to wait a few months or see what comes up for sale. thanks for the info guys!

yea man. i am on zilvia too. now im a lurker tho haha
i am waiting for my new lips for my wheels to come in.
should make my current wheels quite close to what you want.
mine will be 19x9+15 and 19x10.5+0
hopefully, it will fit the rears without a pull. but w/e is fine.
like yakuza said, make the car fit the wheels :D


oh and that green GS with the supremes, hes a local guy to me. ive seen his wheels up close and its sick. his sn is kkng or something like that. aggressive pulls all around