Re-badge question
05-06-10, 07:44 AM
#1
Driver
Thread Starter
Join Date: May 2009
Location: Memphis TN
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Re-badge question
I plan to rebadge the GS 300 on my car....just personal preference. What can I apply to letters that will stick well without hurting paint. The letter still have some old adhesive which I can get off with a razor edge. Thanks.
05-07-10, 11:24 AM
#12
it took me under 5 mins....cut a strip,pulled one side of cover off to expose sticky side, laid it out on emblem, flipped emblem over and cut off excess
05-07-10, 01:24 PM
#14
Driver
iTrader: (1)
Join Date: Nov 2009
Location: NY
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=sakataj;5468195]its called manners....something i grew up with alot of the young kids nowadays know nothing about
i wasnt trying to offend you or anything like that dont take it the wrong way i was just pointing something out, sorry if you took it the wrong way
i wasnt trying to offend you or anything like that dont take it the wrong way i was just pointing something out, sorry if you took it the wrong way
Last edited by BKGEE83; 05-07-10 at 01:26 PM. Reason: mispeled
05-07-10, 04:39 PM
#15
Driver School Candidate
Join Date: Apr 2010
Location: FL
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
What badges are you going to put on? I bought the Black pearl Emblems for my GS and they came with the adhesive on them already. But if yours does not have adhesive then defiantly get some 3M double sided tape and be sure to get some adhesive cleaner before applying. To remove all the old adhesive i recommend you go to a detail supply shop and get some palstic razor blades. They are the same as regular blades but made of plastic and wont mess up your paint.
