"Pay it Forward" Spirit Community Thread
10-29-15, 05:41 AM
#439
I have an OEM wing from my 98 DWP GS400. Bulbs were still working when I took it off. Only flaw is that the cover on the underside of the wing is cracked because I was trying to force it off. I'll get some pics when I remember. LOCAL PICKUP IN HOUSTON, TX.
Also have the internals for the 3rd brake light that are in working condition. I bought 2 of these thinking the first one I bought wasn't working, but turns out my wiring is messed up. If your car came with a 3rd brake light on the rear deck from factory, all 5 bulbs will light up. PAY FOR SHIPPING.
Also have the internals for the 3rd brake light that are in working condition. I bought 2 of these thinking the first one I bought wasn't working, but turns out my wiring is messed up. If your car came with a 3rd brake light on the rear deck from factory, all 5 bulbs will light up. PAY FOR SHIPPING.
Last edited by LexusK; 11-18-15 at 10:36 AM.
11-19-16, 09:27 PM
#441
Driver School Candidate
Join Date: Oct 2007
Location: CA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Free OEM exhaust
While cleaning out my garage I came across my OEM mufflers. They were removed the first week I owned
the car, way back in 2004. They came off a GS 430.
They are free to anyone willing to pick them up...I live in So. CA.
Please PM me...Thanks..Norm
the car, way back in 2004. They came off a GS 430.
They are free to anyone willing to pick them up...I live in So. CA.
Please PM me...Thanks..Norm
02-01-17, 01:56 PM
#442
I have an OEM wing from my 98 DWP GS400. Bulbs were still working when I took it off. Only flaw is that the cover on the underside of the wing is cracked because I was trying to force it off. I'll get some pics when I remember. LOCAL PICKUP IN HOUSTON, TX.
Also have the internals for the 3rd brake light that are in working condition. I bought 2 of these thinking the first one I bought wasn't working, but turns out my wiring is messed up. If your car came with a 3rd brake light on the rear deck from factory, all 5 bulbs will light up. PAY FOR SHIPPING.
Also have the internals for the 3rd brake light that are in working condition. I bought 2 of these thinking the first one I bought wasn't working, but turns out my wiring is messed up. If your car came with a 3rd brake light on the rear deck from factory, all 5 bulbs will light up. PAY FOR SHIPPING.
08-01-18, 10:26 AM
#447
GONE - reuse truck just took it away. - but other suspension parts are still available below.....
SF east bay area, I have a complete set of OEM shock/struct assembly with spring from 2015 GS430. Was in good working order when I replaced it about 3 years ago.
Free for local pick up.
PM if interested.
SF east bay area, I have a complete set of OEM shock/struct assembly with spring from 2015 GS430. Was in good working order when I replaced it about 3 years ago.
Free for local pick up.
PM if interested.
Last edited by bks; 08-07-18 at 10:01 AM.
08-02-18, 03:54 PM
#449
SF east bay, Also have the following available for pickup, preferably as a whole lot....
car was totaled (not my fault
) and replaced with a 2013 GS350 Lux Edition.
2005 GS 430
rear brake drum/disc rotor, slotted. Not OEM, NIB.
2 x tie rod, for front steering, MOOG EV80600, NIB
2 x tie rod end with ball bearing, (left and right), MOOG ES80584 and ES80585, NIB
2 x tie rod boots, Beck/Arnley 1032880, NIB
front sway bar poly bushing, NIB
rear sway bar poly bushing, NIB
and a very special set of
rear lower a-arm to hub bushing from UK (require machine shop to press out old and press in new), search the forum and there was a thread talking about the replacement bushing.
car was totaled (not my fault
) and replaced with a 2013 GS350 Lux Edition.2005 GS 430
rear brake drum/disc rotor, slotted. Not OEM, NIB.
2 x tie rod, for front steering, MOOG EV80600, NIB
2 x tie rod end with ball bearing, (left and right), MOOG ES80584 and ES80585, NIB
2 x tie rod boots, Beck/Arnley 1032880, NIB
front sway bar poly bushing, NIB
rear sway bar poly bushing, NIB
and a very special set of
rear lower a-arm to hub bushing from UK (require machine shop to press out old and press in new), search the forum and there was a thread talking about the replacement bushing.
Last edited by bks; 08-02-18 at 04:06 PM.
