Notices
GS - 2nd Gen (1998-2005) Discussion about the second generation GS300, GS400 and GS430 (1998 - 2005)

Adjustable upper control arms

Old May 17, 2009 | 04:18 PM
  #1  
SloGS400's Avatar
SloGS400
Thread Starter
Pole Position
iTrader: (1)
 
Joined: Mar 2006
Posts: 263
Likes: 0
From: NC
Default Adjustable upper control arms

Anyone have these on their ride?

http://cgi.ebay.com/ebaymotors/SPC-F...Q5fAccessories

Thinking about ordering them, but I'm not too crazy about installing some cheaply made parts as part of my suspension, so I was wondering if any of you have these or have seen them in person to verify a quality fabrication.

Later
Reply
Old May 17, 2009 | 05:12 PM
  #2  
excluesive's Avatar
excluesive
Lexus Champion
iTrader: (10)
 
Joined: Jun 2007
Posts: 4,563
Likes: 5
From: NYC
Default

i was thinking about going with them.. maybe when funds free up
Reply
Old May 17, 2009 | 07:31 PM
  #3  
lxgs4's Avatar
lxgs4
Driver
 
Joined: Feb 2007
Posts: 124
Likes: 2
From: California
Default

I just got these to put on my car. I was able to get the front into specs.

http://www.l-tunedparts.com/product/?id=3011
Reply
Old May 17, 2009 | 07:37 PM
  #4  
SoCal Cyco's Avatar
SoCal Cyco
Pole Position
15 Year Member
Photogenic
Photoriffic
iTrader: (20)
 
Joined: Dec 2007
Posts: 3,151
Likes: 49
From: SoCal
Default

the one on ebay look cheap and flimsy. i would NOT put those on my car. i just would'nt trust them under load. however i would put the ones from l-tunedparts, they look alot more durable. just my .02
Reply
Old May 17, 2009 | 08:09 PM
  #5  
CleanS14's Avatar
CleanS14
Lead Lap
iTrader: (16)
 
Joined: Mar 2009
Posts: 421
Likes: 0
From: CA
Default

Originally Posted by lxgs4
I just got these to put on my car. I was able to get the front into specs.

http://www.l-tunedparts.com/product/?id=3011
Where did you get those arms from? Curious how much they really cost
Reply
Old May 17, 2009 | 08:36 PM
  #6  
EN_VY's Avatar
EN_VY
Lexus Champion
 
Joined: Aug 2007
Posts: 2,886
Likes: 3
From: TX
Default

What do they do? Im a noob so forgive me
Reply
Old May 18, 2009 | 07:23 PM
  #7  
lxgs4's Avatar
lxgs4
Driver
 
Joined: Feb 2007
Posts: 124
Likes: 2
From: California
Default

Carson toyota told me it would take 8-12 weeks for the arms to come in from Japan. I found another seller directly from japan who got it to me in about 10 days. I paid a little more than Carson listed for.
Reply
Old May 18, 2009 | 08:52 PM
  #8  
CleanS14's Avatar
CleanS14
Lead Lap
iTrader: (16)
 
Joined: Mar 2009
Posts: 421
Likes: 0
From: CA
Default

Mind sharing the guy you went through?
Reply
Old May 19, 2009 | 07:51 AM
  #9  
DASHOCKER's Avatar
DASHOCKER
Lexus Fanatic
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (2)
 
Joined: Jul 2004
Posts: 12,191
Likes: 10
From: NYC
Default

Originally Posted by SoCal Cyco
the one on ebay look cheap and flimsy. i would NOT put those on my car. i just would'nt trust them under load. however i would put the ones from l-tunedparts, they look alot more durable. just my .02
I disagree. SPC makes quality aftermarket suspension parts for many cars.. Check out their site http://www.spcperformance.com/

I do not have these on my car but I doubt that SPC would sell a 'cheap & flimsy' parts. More aftermarket suspension companies are FINALLY making suspension components for the GS that were not available in year past.
Reply
Old May 29, 2009 | 06:04 PM
  #10  
blkgs4wnav's Avatar
blkgs4wnav
Driver
 
Joined: Nov 2001
Posts: 196
Likes: 0
From: New York
Default

is this a camber kit or replacement upper control arms?
Reply
Old May 29, 2009 | 07:07 PM
  #11  
FIGS's Avatar
FIGS
The Maker
iTrader: (11)
 
Joined: May 2009
Posts: 2,292
Likes: 146
From: CO
Default

Man those Ikeyas are so expensive. But then again so is a front ball joint with a swivel.
__________________
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions
Reply
Old May 30, 2009 | 02:18 AM
  #12  
SoCal Cyco's Avatar
SoCal Cyco
Pole Position
15 Year Member
Photogenic
Photoriffic
iTrader: (20)
 
Joined: Dec 2007
Posts: 3,151
Likes: 49
From: SoCal
Default

these are replacements. i looked at the website, it does appear to be a full race company, but i still think they look kinda thin. i would wait for others to vouch. imho
Reply
Old Aug 19, 2010 | 04:59 PM
  #13  
bn_bnntt's Avatar
bn_bnntt
Rookie
 
Joined: Nov 2009
Posts: 68
Likes: 0
From: va
Default

So do those adjustable ebay arms fit an SC? Somebody here should know this.
Reply
Old Aug 19, 2010 | 06:14 PM
  #14  
AsGs300's Avatar
AsGs300
Instructor
 
Joined: Jan 2008
Posts: 955
Likes: 2
From: Texas
Default

Originally Posted by EN_VY
What do they do? Im a noob so forgive me
your riding on bags!
GET em, didnt your ball Joins recently snap on ya?
well the $700 something invested will save your fender,suspension parts, also the embarsment us Gs guys go through when the ball joints snaps!

just get a set FOO!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kadrian21
LS - 4th Gen (2007-2017)
2
Sep 24, 2018 04:34 AM
SC400-V8
SC430 - 2nd Gen (2001-2010)
12
Jul 1, 2016 09:06 AM
newgsman
Suspension and Brakes
1
May 6, 2014 11:26 AM
Jaden1
ES - 1st to 6th Gen (1990-2018)
8
Feb 16, 2014 05:39 PM
ancdmd
LS - 3rd Gen (2001-2006)
2
Jun 5, 2011 09:27 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 09:16 AM.