Finsun

Anyone know from experience or from looking at this diagram, which screws (and how many) and stuff I need to reinstall the under engine cover? My car came without one.

tmf2004

iTrader: (15)

you'll need around 15 or 16 screws I think. I just replaced mine a few weeks ago. I bought 10 screws but reused some of the older ones.

roncwms

On my 2002 SC 430I, the lip ate the back, bottom of the radiator is torn. I'd like to replace but do not know what to look for.
Help.

roncwms

On my 2002 SC 430, the lip ate the back, bottom of the radiator is torn. I'd like to replace but do not know what to look for.
Help.

English66

If you are looking to replace the large plastic shield you can go to RockAuto.Com and get one cheep. I paid $ 46. dollars plus shipping for one. Fits my 04 good.

salimshah

I did a decent repair by riveting piece of a plastic.You can add small washer to make the surface wider.

Salim

rogzballz

iTrader: (9)

14 Screws I believe ...

speeddem0n

iTrader: (7)

Thanks for the info on this thread. Looking for one for my ISF.

NorthStyle

iTrader: (16)

I'm not sure if this thread will help you out other than referencing places to purchase a stock one... as I doubt the 2GS shield would fit an 2IS (although you "may" be able to get away with it by cutting/drilling/etc. Doesn't this IS-F come with this piece stock?

Mr Jokster

iTrader: (8)

No need to cut anything, of course it comes with one:

http://is.sewellparts.com/oem-catalo...-ISF-2014.html

speeddem0n

iTrader: (7)

Yes it comes with one but mine is missing. I need the front part (51441D), and i already have the back part (51442E). However it is all sold as one piece and its expensive, more than the one for the GS.


EDIT: Another thanks to Mr Jokster! Your link just made me realize some additional info. You linked for a 2014 ISF which is cheaper than for my 2008. I dont know why the price difference, they should be the same. But the part number is one digit off:

2008 - 5141053080 $318 shipped
2014 - 5141053081 $241 shipped

tmf2004

iTrader: (15)

you should probably post in the IS-F forum or check out Sewell for all lexus parts..

speeddem0n

iTrader: (7)

Already did, but this thread was useful as well. Thanks!

codejd

A deer took the front of my driver side (2008 ES350) off but most of the screws are still in place. How do the existing screws "release" so I can remove and try to replace the entire panel?

TIA
code

burny

Rockauto is the place to get them