I know I keep asking, but I'm undecided on a new set of wheels

debating work meisters that popped up for a decent deal.

19x9 +26 fronts 235.35.19
19x10 +30 rears 275.35.19

2GS fitment? rear tires too wide?

will be lowered on coilovers

Anyone here ride on 22"? if so, wht's your measurements? ...I bought it w the 22" wheels. although the car is raised a lil but it rides pretty good on it. So now, im thinking its possibly to heavy & not consuming great gas mileage. so i want to bring it down on a set of 20's intead.

Wheel Fitment
 

What about a 19x9.5 +27 with a 235/35/19 up front? The car will be lowered about 2.5" and can shave the fender a little, but would prefer to keep the fender liner intact if possible. Am I dreaming on this wheel fitment? What do you guys think?

dont shave the fronts. just roll it. 19x9.5 +27 will fit with a rolled fender. if your running achilles tires id go 225

Blast from the past :D

What about with a 19x10.5 +22 rear with a 265/30/19. You think it's do-able with just shaving the rear or would you have to pull it too?

This is a great write up, i was always wondering about wheel and tire fitments.

makes me wonder on a 19x8 +30 in front on a 235/35/19 and a 19x9.5 +25 rear on a 265/35/19 on a 2gs, on tanabe nf210...gurus?

That oughtta be fine. Those NF's aren't really gonna drop you low enough to have alot of rubbing no matter what wheel/tire u go with.

19x8.5 +40, 245/35 w/ 15mm spacers
19x9.5 +42, 275/30

On BC Coils w/ less than a finger gap. Does it needs modding?

You should be fine... I just picked up a set of BC coils. How long can you go on the fronts?

How low you mean? I havent tried the lowest setting yet. But there is a guy on the suspension forum that is max lowered on bc with pics.

BEST ADVICE hands down!!!!

Im gonna bring this back from the past yet again..... will these work?

2GS, lowered

19x9.5 +32
19x10.5 +29

if they will work, how wide can I go in the rear. Im not really looking for the stretched look, I need to go as wide as possible out back.

suggestions
 

i was just wondering if these 20" rims are to aggressive and if it requires modding, just for future reference here is the size 20X8.5"/20X10" 4" REAR LIP
+35 & +40 OFFSET and of course i am planning on lowering the car but how low should i go to play it safe or do you think it is just a bad idea to go with that size and offset.