![]() |
Keyless Entry won't work...
I just bought my first Lexus, a 99 GS 300 and I am pumped! However, the keyless entry does not work. I just put a new battery in it. What could it be? Thanks!
|
when you press the buttons does it beep at all?
and when you said it doesn't work, nothing works at all, or just some functions? |
No beep
It does not beep at all. The red light on the key does come on however.
|
seems like the antenna system (or alarm system) on the car itself is defective?
|
is it possible that it's a replacement key that was coded for the immobilizer, but not for everything else? :uh:
|
Same Problem
I was searching for a thread on this. My 1998 GS 300 that I have had for years just started this B.S. It would work half the time then replaced the battery 2 months ago and had the same result. In the past week it wont unlock anything. The red light on the key does work however. It worked great 2 years ago then gradually got worse and not working at all now. Let me know if anybody has a solution or experienced this.
Andrew |
hmmm. i just started a thread related to this problem. the range of my keyless entry is about 4 feet from the car.
|
Check on the reciever box and antenna in your car. Something in there might of come loose. Its the body panel closest to where the rear right passenger headrest is. Called a C-Pillar? Correct me if im wrong. The reciever is hidden in that panel.
Try to put your key right up next to it and see if it the alarm beeps. If it does, then its probably the antenna (reciever in car) that got disconnected causing a severe reduction in range. If it doesn't then it might be your key, or the reciever is blown. |
Originally Posted by gs300inky
(Post 1589741)
I was searching for a thread on this. My 1998 GS 300 that I have had for years just started this B.S. It would work half the time then replaced the battery 2 months ago and had the same result. In the past week it wont unlock anything. The red light on the key does work however. It worked great 2 years ago then gradually got worse and not working at all now. Let me know if anybody has a solution or experienced this.
Andrew |
Reprogram it?
|
How do you program a key?
|
| All times are GMT -7. The time now is 02:56 AM. |
© 2026 MH Sub I, LLC dba Internet Brands