GS - 2nd Gen (1998-2005) Discussion about the second generation GS300, GS400 and GS430 (1998 - 2005)

Cracked front bumper

Thread Tools
 
Search this Thread
 
Old 01-26-23, 02:44 PM
  #1  
BatmanLex
Driver School Candidate
Thread Starter
 
BatmanLex's Avatar
 
Join Date: Oct 2021
Location: CA
Posts: 19
Received 1 Like on 1 Post
Default Cracked front bumper

Hi all. I have a friend with a 2000 GS that has a cracked front bumper. For all those California owners, any body shops or collision centers that you recommend? Anything to look out for? Thanks!
Old 01-26-23, 02:58 PM
  #2  
Raven01750
Racer
 
Raven01750's Avatar
 
Join Date: Aug 2019
Location: CA
Posts: 1,734
Received 332 Likes on 266 Posts
Default

Hmmm. Yea. No. They have tools that can be used to complete Plastic Welds. But it's the paint. That's the real cost. The new one I like is the "Hot Staple Plastic Welding for Car Bumper Fender Welder Stapler Repair Kit" on ebay for less than $20.00. Some filler then paint. If he takes it somewhere, they are going to quote probably around $1,600 for the entire job. It's too small for most shops.

Paul
Old 01-28-23, 10:57 AM
  #3  
newgsman
Instructor
iTrader: (4)
 
newgsman's Avatar
 
Join Date: Jul 2007
Location: Ontario
Posts: 907
Received 83 Likes on 56 Posts
Default

Depending how fussy your friend is, I would try and find a used one of the same color. These cars are old enough with plenty in the junk yards that you should be able to find one for relatively low cost. Around here there always some available at the JDM shops. Bumper is replacement is a pretty easy DIY.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
xscape34
IS - 1st Gen (2001-2005)
3
07-25-12 09:03 PM
cyclemax
GS - 2nd Gen (1998-2005)
13
04-28-05 06:53 PM



Quick Reply: Cracked front bumper



All times are GMT -7. The time now is 06:10 PM.