gs 300 '93 aristo swap
#16
Driver
iTrader: (2)
Join Date: Jul 2008
Location: Florida
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Anymore pictures of the intercooler mounting? Specifically looking straight down from top. I want to see how close it is too all of the lines behind it.
Car looks great, and all of the pictures are cool too, have given me some ideas for my own project, thanks!!
Car looks great, and all of the pictures are cool too, have given me some ideas for my own project, thanks!!
#17
Driver School Candidate
Thread Starter
Join Date: Feb 2013
Location: ca
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
For the intercooler support, I make to holes in the front aluminium protection from down to up, the down side need to use a biger bit drill, because need space to pass thru the tool to tie the nut from begin
fell free to ask any doubt or question tha you have
regards.
carlos
#18
Driver School Candidate
Thread Starter
Join Date: Feb 2013
Location: ca
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
here some pic for the intercooler instalation
need to modify the piping support
the filter need to move it up, to clear the top of the intercooler
here is a pic of the bolt install it, in the front aluminium protection
need to modify the piping support
the filter need to move it up, to clear the top of the intercooler
here is a pic of the bolt install it, in the front aluminium protection
#20
Driver School Candidate
Thread Starter
Join Date: Feb 2013
Location: ca
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
#25
Driver School Candidate
Thread Starter
Join Date: Feb 2013
Location: ca
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
so after few day of relax, waiting part to arrive, we can continue with some action
we receive the trany cooler and the exhaust pipes to finish the down pipe
the aristo engine, didn't came with the power steering container, so need to install a supra MKIII PS container :S we don't have to much space to install it :S
we receive the trany cooler and the exhaust pipes to finish the down pipe
the aristo engine, didn't came with the power steering container, so need to install a supra MKIII PS container :S we don't have to much space to install it :S
#26
Driver School Candidate
Thread Starter
Join Date: Feb 2013
Location: ca
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
time to work in the exhaust system, the customer didn't want to change the existing exhaust system, so we need to connect the down pipe to the existing exhaust, let see what can we do
First we will cut the flange from the first catalytic converter
them time to build the piping to connect the down pipe and the exhaust pipe, it was difficult to do it, but not impossible
then time to finish the down pipe
First we will cut the flange from the first catalytic converter
them time to build the piping to connect the down pipe and the exhaust pipe, it was difficult to do it, but not impossible
then time to finish the down pipe
#27
Driver School Candidate
Thread Starter
Join Date: Feb 2013
Location: ca
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Downpipe done
Time to install the transcooler
then, we need to install a electric fan, because the fan blades hit the ic piping
parts needs!
Custom bracket to install the fan in the radiator
i hope tomorrow will be finish
Time to install the transcooler
then, we need to install a electric fan, because the fan blades hit the ic piping
parts needs!
Custom bracket to install the fan in the radiator
i hope tomorrow will be finish
#28
Driver School Candidate
Thread Starter
Join Date: Feb 2013
Location: ca
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
the electric fan its ready
this is the wiring diagram
When the ignition switch its on, the fan will run at low speed
Whet the temperature reach 200F, the fan speed will change to Hi
need to extend the temperature sensor harness, to have a better sensing
now the ic piping its done
a small vid
this is the wiring diagram
When the ignition switch its on, the fan will run at low speed
Whet the temperature reach 200F, the fan speed will change to Hi
need to extend the temperature sensor harness, to have a better sensing
now the ic piping its done
a small vid
#29
Driver School Candidate
Thread Starter
Join Date: Feb 2013
Location: ca
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
so time to fix the signal of the tachometer, we need to remove the gauge cluster and weld a wire jumper to fix and work the tachometer
some pics of the ic pipig
some pics of the ic pipig
#30
Driver School Candidate
Thread Starter
Join Date: Feb 2013
Location: ca
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
lexus almost done
we build additional bracket to the down pipe, because the existing exhaust system its heavy,
then proceed to build the wastegate discharge pipe
we build additional bracket to the down pipe, because the existing exhaust system its heavy,
then proceed to build the wastegate discharge pipe