sam430

iTrader: (10)

http://www.amazon.com/Phoenix-RSDC12...ref=pd_sim_e_1

The link above is the 12" and it weigh about the same as the 10"

The 10" is linked below and it the same size as OEM for 2GS.

Big Mack

iTrader: (1)

I think you meant This one for the 10" because both the links on your post are to the 12".

Big Mack

LiCelsior

iTrader: (32)

are these any good? i need a decent temp replacement.

davvv

iTrader: (1)

In my opinion they are very clean sounding and if u want they can get loud. Im thinkin there the best bang for the buck.

sam430

iTrader: (10)

This is more than decent...it might even be a permanent.

LiCelsior

iTrader: (32)

well i bought one, when it comes in ill let u guys know how it is .

Alexus_300

iTrader: (4)

ehh.. Can't use this in the rear deck of my GS since it can't be use in free air. Can someone recommend something that I can install in my rear deck?

sam430

iTrader: (10)

I just received these today... I have it installed in my rear deck as IB... sounded way better than my kicker comp (which is IB capable).

The box requirement is tiny so I'm going to use some lightweight wood for box and attach it to the stock location.

Alexus_300

iTrader: (4)

Really?? when you're done installing it, can you make a video or something on youtube as I want to place these in the rear stock location as well.

ntran18

iTrader: (27)

What is the recommended volume of the box?

duby1

iTrader: (7)

so, can you put this inside of a second gen GS?

PureDrifter

iTrader: (10)

wow guys...wow. do your homework in the model specific forums and the audio forum. this is just a thread on the subs for sale!

here is a link to the sub specs:
ftp://public_user:password@www.rodin...r%20manual.pdf

Alexus_300

iTrader: (4)

I'm lost when it comes to audio stuff man. You can ask me how to build a motor or suspension and I'll tell you everything but I have no clue on this. Since this thing is cheap, if I can use it in the rear deck of my 2001 GS300 as free air subs, then I'll jump on it. If not, then I guess no.

ntran18

iTrader: (27)

Thanks. I was looking all over for the manual.

sam430

iTrader: (10)

You can fit this inside a 2nd gen, but you'll need aftermaket amp to make it work. It sound good IB although it's not meant for it.

This braket will allow you to attach a 10" if you don't want to load it from the top. You may need to make some adjustment if you are loading it from the top (screw to tie it down, but you need more space up top because of the throw).

Then again, you can buy this for 40 bux and load it from the bottom.
http://www.edesignaudio.com/index.php?cPath=1_78_117

Alexus... I've never done speaker boxes, LOL, it's not gonna be pretty and it'll be my first time. But I'm a tinker'r so I do stuff like this LOL.