CA TPMS Pipe Bomb w/ Liquid Filled Gauge
#1
TPMS Pipe Bomb w/ Liquid Filled Gauge
I have for sale an extra TPMS bomb that I made for a friend but they didn't want it.
It holds pressure and I've tested it under water to make sure there are no air leaks anywhere. The gauge is oil filled and reads up to 60 psi.
It's made of 3" white, schedule 40 PVC and is large enough to hold 4 TPMS sensors. Unthreaded joints were primered and sealed well with PVC cement.
The bottom end has a removable cap but the new owner will need pipe sealing compound to reseal the cap after the TPMS sensors are placed inside.
SOLD
It holds pressure and I've tested it under water to make sure there are no air leaks anywhere. The gauge is oil filled and reads up to 60 psi.
It's made of 3" white, schedule 40 PVC and is large enough to hold 4 TPMS sensors. Unthreaded joints were primered and sealed well with PVC cement.
The bottom end has a removable cap but the new owner will need pipe sealing compound to reseal the cap after the TPMS sensors are placed inside.
SOLD
Last edited by es808; 04-28-14 at 03:39 PM.
Thread
Thread Starter
Forum
Replies
Last Post