Coming on a street going by you! LOL
09-24-14, 04:12 PM
#1
Lexus Test Driver
Thread Starter
iTrader: (1)
Join Date: Dec 2008
Location: fl
Posts: 1,540
Likes: 0
Received 0 Likes
on
0 Posts
Coming on a street going by you! LOL
So we were up at the Megasquirt open house/tuning seminar in Suwanee, GA. and they have a dynapack HUB dyno (load dyno) and here is the result on E78. See picture of dynapack mounting below.
We tried pulling on the car in 4th gear but the dyno was maxed out for torque as seen on the 3rd picture.
So that required us to do a 5th gear pull (V-160) =1.1 drive ratio but due to the 3.26 rear ratio the dyno would only allow the car to have a max rpm of 7900 well below my 9000 normal limiter I set on a traditional dyno.
The final hp # was in 5th gear and 7900 rpms.
The dyno start rpm was 3500 thats the spool you hear before the pass.
ENJOY!!!
We tried pulling on the car in 4th gear but the dyno was maxed out for torque as seen on the 3rd picture.
So that required us to do a 5th gear pull (V-160) =1.1 drive ratio but due to the 3.26 rear ratio the dyno would only allow the car to have a max rpm of 7900 well below my 9000 normal limiter I set on a traditional dyno.
The final hp # was in 5th gear and 7900 rpms.
The dyno start rpm was 3500 thats the spool you hear before the pass.
ENJOY!!!
Last edited by blk&blu*j; 09-24-14 at 04:23 PM.
Thread
Thread Starter
Forum
Replies
Last Post