ClubLexus - Lexus Forum Discussion - ES - 1st to 6th Gen (1990-2018) https://www.clublexus.com/forums/ Forum for all 1990 - 2018 ES Models en Sat, 30 May 2026 00:33:38 GMT vBulletin 60 https://www.clublexus.com/forums/images/misc/rss.jpg ClubLexus - Lexus Forum Discussion - ES - 1st to 6th Gen (1990-2018) https://www.clublexus.com/forums/ ES300 CV Boot Repair Using HippoRed SPlit CV Boot https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051982-es300-cv-boot-repair-using-hippored-split-cv-boot-new-post.html Thu, 28 May 2026 07:43:44 GMT The following CV Boot Repair Using a HippoRed Split CV Boot (80mm): Boot dimensions: Small diameter hole = 25mm, Large diameter hole = 79mm, Total Length = 100mm. The HippoRed Split CV Boot cost $41... The following CV Boot Repair Using a HippoRed Split CV Boot (80mm): Boot dimensions: Small diameter hole = 25mm, Large diameter hole = 79mm, Total Length = 100mm. The HippoRed Split CV Boot cost $41 each on Amazon with free shipping.

Note: I initially purchased the Bailcast Universal Split CV boot but the tongue-and-groove design of the split boot joint had only 1mm overlap between the two sides, which is minimal surface area for the glue to hold both sides together, so I returned the boots and ordered the HippoRed Split CV Boot instead.

My Car: 2000 ES300 V6 with aftermarket axles from previous repair. The large diameter side had the round configuration rather than the tri-lobe configuration. Both inner boots (left and right) ripped 2 months ago so I covered both ripped boots with plastic bag, duct tape, and zip ties to protect CV joints until I acquired all necessary repair equipment. This 2-boot repair took 5 hours.

The Good: Boot is made of nice thick rubber and appears to be durable. The tongue-and-groove design of the split boot joint is much more robust than the usual $20 universal boot and when joint is pushed together, it will hold together on its own so it is not necessary to hold the joint together with fingers until the glue dries (assuming the clamp groove on the axle is 25mm in diameter or less). However, I used a zip-tie in the middle of the boot to loosely hold the boot together until it dried (see photo). The amount of the included glue (Loctite Super Attak Power Flex Gel, 3 grams) is more than enough to do the job. It is a rubberized formula equivalent to the Loctite Super Glue Ultra Gel Control sold in the USA and is made for joining flexible materials like rubber. The glue takes a long time to dry; still tacky 2 hours after application even though the label says it will dry to touch in 30 seconds.

The Not So Good: The included stainless steel clamps are the strap-type clamps rather than the Oetiker-style crimp clamps which are preferred for ease of use.

Pro-Tips:
(1) Wipe axle surface very thoroughly with cloth and alcohol prior to pushing boot over axle. Apply masking tape to cover split joint on boot (see photo) to protect boot joint from contamination. Remove tape just prior to using glue.



(2) Obtain a plastic 50cc marinade/flavor meat injector ($5) to inject grease into CV joint. The hole in the needle should be large enough for thick grease to flow through. If there are several holes in the needle, cover extra holes with tape so the only open hole is at the tip. Put grease into device and put needle tip into CV joint and force grease into joint. If old grease is dirty, it must be removed first using Brake Cleaner spray. However, if it appears clean (the old grease in both of my CV joints appeared to be clean), I prefer to leave the old clean grease in-place and add more grease using the new grease included in the HippoRed package. IMHO, it is a greater concern to have too little grease in the CV joint than to worry about any chemical 'reaction' between the 2 different greases.

(3) Prior to tightening the clamps, the end of the clamp with the 3 teeth should be slightly bent downward/inward toward the center of the circle to assure the teeth engage the holes easily.

(4) Manually tighten the clamps as much as possible BEFORE using the tool to crimp the clamps because crimping only tightens the clamp an extra 8mm which is not much. If the clamps are too loose prior to crimping, it will be too loose after crimping as well. First, tighten the clamp by hand as much as possible, then attempt to tighten a bit more using a needle-nose plier (grip the clamp with tip of plier at the rectangular-shaped corner of the clamp and pull hard).




(5) Obtain screw-type clamp tool (see photo - it is clone of Toyota tool used at the factory), a package of Oetiker style crimp clamps (it is nice to have extra clamps in case a clamp or two get mangled in the crimping process), and also plier-style crimp tool - this is because sometimes, the screw-style tool slips over the rectangular crimp area of the clamp when starting the crimping process so using the plier-style tool to start the crimp process first may be necessary. However, since the plier-style tool requires a superhuman amount of hand strength to finish crimping, use the screw-style tool to finish the crimp - this is much easier. This screw-type clamp tool requires much less strength because the screw can be tightened easily, once the crimp is started.

(6) Because the glue takes a long time to fully cure, wait 1-2 days before driving. ]]> ES - 1st to 6th Gen (1990-2018) cncyana https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051982-es300-cv-boot-repair-using-hippored-split-cv-boot.html 2007 ES350 Leather Seat Repair https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051973-2007-es350-leather-seat-repair-new-post.html Wed, 27 May 2026 17:15:51 GMT I was quoted $380 and $475 to repair/replace the bottom seat. I think this is to expensive. I've tried a cover from Ebay before and it wasn't an exact fit which ended up costing me more money to get modified. (driver seat)

Is there repair kit to fix this thing? I know about the patches but it's not visually appealing at all.


]]> ES - 1st to 6th Gen (1990-2018) June1978 https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051973-2007-es350-leather-seat-repair.html Engine noise https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051915-engine-noise-new-post.html Tue, 26 May 2026 22:34:10 GMT Hi, new to this forum first post. Wife has a 2005 Lexus ES 330 has around 250,000 miles. I’m a 30 year GM tech so all our cars are meticulously maintained. Long story short car sat in driveway... Hi, new to this forum first post. Wife has a 2005 Lexus ES 330 has around 250,000 miles.
I’m a 30 year GM tech so all our cars are meticulously maintained. Long story short car sat
in driveway for 4 days, she goes too start the car and engine is making noise. I get home
start the car and sure enough engine is knocking ? I’m dumbfounded as to how it was
perfect fine before it sat in the driveway, and know the engine is knocking . Any
suggestions on this issue. Thanks. ]]> ES - 1st to 6th Gen (1990-2018) Rowdy8 https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051915-engine-noise.html <![CDATA[ES - 1st to 6th Gen (1990-2018) Exterior & Interior Options from Mod in Japan]]> https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051909-es-1st-to-6th-gen-1990-2018-exterior-and-interior-options-from-mod-in-japan-new-post.html Tue, 26 May 2026 21:43:40 GMT Hey everyone, Mod in Japan carries exterior and interior upgrade options for the ES - 1st to 6th Gen (1990-2018). This guide covers aero parts, body styling, exterior accessories, and interior... Hey everyone, Mod in Japan carries exterior and interior upgrade options for the ES - 1st
to 6th Gen (1990-2018). This guide covers aero parts, body styling, exterior accessories,
and interior add-ons where available.

Quick ES - 1st to 6th Gen Exterior & Interior Buying Guide

Front Lips / Front Spoilers: Best first exterior upgrade for a more aggressive front-
end without replacing the full bumper.

Side Skirts / Side Splitters: Best paired with a front lip to make the side profile look
lower and more complete.

Rear Diffusers / Rear Lips: Best upgrade for cleaning up the rear bumper area,
especially when paired with an exhaust setup.

Spoilers / Wings: Best for adding a sportier rear profile. Trunk spoilers are usually
cleaner, while wings are more aggressive.

Carbon Fiber Accessories: Best for premium exterior detail pieces like mirror caps,
fender trim, rear garnishes, and spoilers.

Interior Accessories: Best for improving the parts you touch and see every day,
including steering wheels, trim, mats, pedals, and cabin accessories.


Quick Recommendations

Best first exterior upgrade: Front lip, window visors, or subtle spoiler
Best full aero setup: Front lip + side skirts + rear diffuser
Best rear styling upgrade: Rear diffuser or trunk spoiler
Best spoiler option: Trunk spoiler or roof spoiler
Best interior upgrade: Steering wheel, trim, or cabin accessories if available


Aerodynamics & Body Styling

DFC 00-01 Lexus ES300 Rear-L Premium Caliper - Silver Zinc Coated - 331-76605
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: dfc331-76605
Price: 81.62 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/380072/

DFC 00-01 Lexus ES300 Rear-R Premium Caliper - Silver Zinc Coated - 331-76604
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: dfc331-76604
Price: 81.62 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/380071/

DFC 02-06 Lexus ES330 Front-L Premium Caliper - Silver Zinc Coated - 331-75025
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: dfc331-75025
Price: 138.26 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/379932/

DFC 02-06 Lexus ES330 Front-R Premium Caliper - Silver Zinc Coated - 331-75024
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: dfc331-75024
Price: 138.26 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/379931/

DFC 02-06 Lexus ES330 Rear-L Premium Caliper - Silver Zinc Coated - 331-76671
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: dfc331-76671
Price: 75.72 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/380098/

DFC 02-06 Lexus ES330 Rear-R Premium Caliper - Silver Zinc Coated - 331-76670
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: dfc331-76670
Price: 75.72 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/380097/

DFC 07-11 Lexus ES350 Rear-L Premium Caliper - Silver Zinc Coated - 331-76687
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: dfc331-76687
Price: 89.00 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/380112/

DFC 07-11 Lexus ES350 Rear-R Premium Caliper - Silver Zinc Coated - 331-76686
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: dfc331-76686
Price: 89.00 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/380111/

DFC 07-18 Lexus ES350 Front-L Premium Caliper - Silver Zinc Coated - 331-76223
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: dfc331-76223
Price: 97.41 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/380048/

DFC 07-18 Lexus ES350 Front-R Premium Caliper - Silver Zinc Coated - 331-76222
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: dfc331-76222
Price: 97.41 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/380047/

DFC 12-17 Lexus ES350 Rear-L Premium Caliper - Silver Zinc Coated - 331-76707
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: dfc331-76707
Price: 96.70 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/380130/

DFC 12-17 Lexus ES350 Rear-R Premium Caliper - Silver Zinc Coated - 331-76706
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: dfc331-76706
Price: 96.70 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/380129/

DFC 12-18 Lexus ES300h Rear-L/Rear-R Premium Caliper - Silver Zinc Coated - 331-
76716
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: dfc331-76716
Price: 93.05 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/380137/

DFC 12-18 Lexus ES300h Rear-R/Rear-L Premium Caliper - Silver Zinc Coated - 331-
76717
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: dfc331-76717
Price: 93.05 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/380138/

DFC 18-24 Lexus ES250 Rear-L Silver Zinc Coated Premium Caliper - 331-76739
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: dfc331-76739
Price: 121.44 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/380144/

DFC 88-99 Lexus ES250 Rear-L Silver Zinc Coated Premium Caliper - 331-76619
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: dfc331-76619
Price: 81.25 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/380078/

DFC 88-99 Lexus ES300 Rear-R Silver Zinc Coated Premium Caliper - 331-76618
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: dfc331-76618
Price: 81.25 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/380077/

DFC 94-97 Lexus ES300 Front-L Silver Zinc Coated Premium Caliper - 331-76119
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: dfc331-76119
Price: 132.93 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/379979/

DFC 94-97 Lexus ES300 Front-R Premium Caliper - Silver Zinc Coated - 331-76118
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: dfc331-76118
Price: 132.93 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/379978/

DFC 97-04 Lexus ES300 Front-L Premium Caliper - Silver Zinc Coated - 331-76161
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: dfc331-76161
Price: 96.74 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/380001/

DFC 97-04 Lexus ES300 Front-R Premium Caliper - Silver Zinc Coated - 331-76160
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: dfc331-76160
Price: 96.74 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/380000/

Power Stop 00-01 Lexus ES300 Rear Autospecialty Brake Kit w/Calipers -
KCOE1084
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: psbKCOE1084
Price: 246.52 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/414283/

Power Stop 00-01 Lexus ES300 Rear Left Autospecialty Caliper w/Bracket - L2611
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: psbL2611
Price: 76.11 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/416651/

Power Stop 00-01 Lexus ES300 Rear Red Calipers w/Brackets - Pair - S2610
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: psbS2610
Price: 193.08 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/417878/

Power Stop 00-01 Lexus ES300 Rear Right Autospecialty Caliper w/Bracket -
L2610
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: psbL2610
Price: 76.11 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/416650/

Power Stop 00-01 Lexus ES300 Rear Z26 Street Warrior Brake Kit w/Calipers -
KC1084-26
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: psbKC1084-26
Price: 358.56 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/413949/

Power Stop 02-03 Lexus ES300 Front Left Autospecialty Caliper w/Bracket -
L2830
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: psbL2830
Price: 98.66 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/416791/

Power Stop 02-03 Lexus ES300 Front Right Autospecialty Caliper w/Bracket -
L2831
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: psbL2831
Price: 98.66 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/416792/

Power Stop 02-03 Lexus ES300 Rear Autospecialty Brake Kit w/Calipers -
KCOE2418
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: psbKCOE2418
Price: 230.33 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/414474/

Power Stop 02-03 Lexus ES300 Rear Left Autospecialty Caliper w/Bracket - L2685
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: psbL2685
Price: 67.27 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/416717/

Power Stop 02-03 Lexus ES300 Rear Red Calipers w/Brackets - Pair - S2684
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: psbS2684
Price: 167.13 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/417900/

Power Stop 02-03 Lexus ES300 Rear Right Autospecialty Caliper w/Bracket -
L2684
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: psbL2684
Price: 67.27 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/416714/

Power Stop 02-03 Lexus ES300 Rear Z36 Truck & Tow Brake Kit w/Calipers - KC2418-
36
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: psbKC2418-36
Price: 350.37 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/414077/

Power Stop 04-06 Lexus ES330 Front Autospecialty Brake Kit w/Calipers -
KCOE1141
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: psbKCOE1141
Price: 338.38 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/414292/

Power Stop 07-12 Lexus ES350 Rear Autospecialty Brake Kit w/Calipers -
KCOE3068
Type: Exterior / interior accessory
Best For: Exterior styling upgrade
SKU: psbKCOE3068
Price: 249.55 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/414524/


For setup recommendations, availability, or formal quotes, email
sales@modinjapan.com.
]]> ES - 1st to 6th Gen (1990-2018) ModInJapan https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051909-es-1st-to-6th-gen-1990-2018-exterior-and-interior-options-from-mod-in-japan.html <![CDATA[ES - 1st to 6th Gen (1990-2018) Engine & Intake Options from Mod in Japan]]> https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051880-es-1st-to-6th-gen-1990-2018-engine-and-intake-options-from-mod-in-japan-new-post.html Tue, 26 May 2026 20:50:11 GMT Hey everyone, Mod in Japan carries engine, intake, airflow, cooling, ignition, and supporting parts for the ES - 1st to 6th Gen (1990-2018). This guide is meant to help owners quickly understand the... Hey everyone, Mod in Japan carries engine, intake, airflow, cooling, ignition, and supporting parts for the ES - 1st to 6th Gen (1990-2018). This guide is meant to help owners quickly understand the main upgrade paths and choose the right setup.

Pricing note: Some brands restrict advertised pricing online. For our best available price, please click “Request Quote” on the product page and we’ll follow up with the best deal we can offer.

Questions? Email us at sales@modinjapan.com and we’ll help you choose the right engine or intake setup.

Need a formal quote? Please email sales@modinjapan.com with your full name, email address, phone number, billing address, and shipping address. We’ll email you a formal quote that you can review and use to complete checkout.

Fitment and emissions note: Always confirm year, trim, engine, drivetrain, and local emissions laws before ordering. Headers, downpipes, catalytic converters, race pipes, and some intake parts may not be emissions legal for street use in all areas.

Quick ES - 1st to 6th Gen (1990-2018) Engine & Intake Buying Guide

Drop-in Air Filter: Best first upgrade for simple maintenance and mild airflow improvement while keeping the factory airbox.

Intake System / Intake Pipe: Best choice if you want more intake sound, improved airflow, and a cleaner engine bay look.

Headers / Manifolds: Best for owners chasing stronger sound and performance potential, but these are more involved installs and may affect emissions compliance.

Cooling Parts: Best for reliability, especially on older vehicles, track use, hot climates, or high-mileage builds.

Fuel and Ignition Parts: Best for maintenance, high-mileage refreshes, and supporting more serious engine builds.


Quick Recommendations

Best first upgrade: Drop-in filter or intake pipe
Best power/sound upgrade: Headers or exhaust manifold upgrade
Best maintenance refresh: Ignition coils, fuel injectors, or related service parts
Best overall advice: Match the part to your goal: maintenance, sound, airflow, cooling reliability, or power support.


Intake & Air Filters

MAHLE Original Lexus Es300 03-94 Intake Manifold Set - MS16348
Type: Headers / manifold
Best For: Intake sound and airflow improvement
SKU: vicMS16348
Product URL:
https://www.modinjapan.com/mahle-ori...t-ms16348.html

MAHLE Original Lexus Es330 06-04 Intake Manifold Set - MS19565
Type: Headers / manifold
Best For: Intake sound and airflow improvement
SKU: vicMS19565
Product URL:
https://www.modinjapan.com/mahle-ori...t-ms19565.html

MAHLE Original Lexus Es350 13-07 Intake Manifold Set - MS19675
Type: Headers / manifold
Best For: Intake sound and airflow improvement
SKU: vicMS19675
Product URL:
https://www.modinjapan.com/mahle-ori...t-ms19675.html

Weapon R 07-08 Lexus ES350 Dragon Intake Polished - 805-163-101
Type: Engine / intake part
Best For: Intake sound and airflow improvement
SKU: wpn805-163-101
Product URL:
https://www.modinjapan.com/weapon-r-...5-163-101.html


Headers, Manifolds & Front Pipes

MAHLE Original Lexus Es300 03-94 Exhaust Manifold Gasket - MS16344
Type: Headers / manifold
Best For: More sound, flow and performance potential
SKU: vicMS16344
Product URL:
https://www.modinjapan.com/mahle-ori...t-ms16344.html

MAHLE Original Lexus Es330 06-04 Exhaust Manifold Gasket - MS19302
Type: Headers / manifold
Best For: More sound, flow and performance potential
SKU: vicMS19302
Product URL:
https://www.modinjapan.com/mahle-ori...t-ms19302.html

MagnaFlow Conv DF 02-03 Lexus ES300 3.0L Manifold - 50260
Type: Headers / manifold
Best For: More sound, flow and performance potential
SKU: mag50260
Product URL:
https://www.modinjapan.com/magnaflow...agn-50260.html

MagnaFlow Conv DF 04-06 Lexus ES330 / 04-06 Toyota Camry/05-08 Solara 3.3L Y-Pipe Assembly - 23009
Type: Front pipe / midpipe
Best For: More sound, flow and performance potential
SKU: mag23009
Product URL:
https://www.modinjapan.com/magnaflow...agn-23009.html

MagnaFlow Conv DF 07-10 Lexus ES350 / 07-10 Toyota Camry 3.5L Y-Pipe Assembly (49 State) - 49712
Type: Front pipe / midpipe
Best For: More sound, flow and performance potential
SKU: mag49712
Product URL:
https://www.modinjapan.com/magnaflow...agn-49712.html


Fuel & Ignition

MAHLE Original Lexus Es300 03-99 Fuel Injection Grommets - B45854
Type: Fuel system
Best For: Maintenance, reliability or higher-power support
SKU: vicB45854
Product URL:
https://www.modinjapan.com/mahle-ori...ts-b45854.html

MAHLE Original Lexus Es350 13-07 Injector O-Ring Kit - GS33548
Type: Fuel system
Best For: Maintenance, reliability or higher-power support
SKU: vicGS33548
Product URL:
https://www.modinjapan.com/mahle-ori...t-gs33548.html


Engine Gaskets & Service Parts

MAHLE Original Lexus ES330 06-04 Throttle Body Gasket - G31782
Type: Engine gasket / service part
Best For: Repair, refresh or install support
SKU: vicG31782
Product URL:
https://www.modinjapan.com/mahle-ori...et-g31782.html

MAHLE Original Lexus Es250 91-90 Camshaft Seal - 66905
Type: Engine gasket / service part
Best For: Repair, refresh or install support
SKU: vic66905
Product URL:
https://www.modinjapan.com/mahle-ori...eal-66905.html

MAHLE Original Lexus Es300 03-94 Rear Main Seal Set - JV1655
Type: Engine gasket / service part
Best For: Repair, refresh or install support
SKU: vicJV1655
Product URL:
https://www.modinjapan.com/mahle-ori...et-jv1655.html

MAHLE Original Lexus Es300 03-94 Water Pump Gasket - K31626
Type: Engine gasket / service part
Best For: Repair, refresh or install support
SKU: vicK31626
Product URL:
https://www.modinjapan.com/mahle-ori...et-k31626.html

MAHLE Original Lexus Es300 03-98 Oil Pump Oil Seal - 67010
Type: Engine gasket / service part
Best For: Repair, refresh or install support
SKU: vic67010
Product URL:
https://www.modinjapan.com/mahle-ori...eal-67010.html

MAHLE Original Lexus Es300 03-99 Cylinder Head Gasket - 54338
Type: Engine gasket / service part
Best For: Repair, refresh or install support
SKU: vic54338
Product URL:
https://www.modinjapan.com/mahle-ori...ket-54338.html

MAHLE Original Lexus Es300 03-99 Cylinder Head Gasket - 54339
Type: Engine gasket / service part
Best For: Repair, refresh or install support
SKU: vic54339
Product URL:
https://www.modinjapan.com/mahle-ori...ket-54339.html

MAHLE Original Lexus Es300 03-99 Valve Cover Gasket (Left) - VS50406SL
Type: Engine gasket / service part
Best For: Repair, refresh or install support
SKU: vicVS50406SL
Product URL:
https://www.modinjapan.com/mahle-ori...vs50406sl.html

MAHLE Original Lexus Es300 03-99 Valve Cover Gasket (Right) - VS50406SR
Type: Engine gasket / service part
Best For: Repair, refresh or install support
SKU: vicVS50406SR
Product URL:
https://www.modinjapan.com/mahle-ori...vs50406sr.html

MAHLE Original Lexus Es300 98-94 Cylinder Head Gasket - 54336
Type: Engine gasket / service part
Best For: Repair, refresh or install support
SKU: vic54336
Product URL:
https://www.modinjapan.com/mahle-ori...ket-54336.html


Other Engine Parts

MAHLE Original Lexus Es300 03-94 Throttle Body To Adapter - G31624
Type: Engine / intake part
Best For: Engine bay upgrade or supporting part
SKU: vicG31624
Product URL:
https://www.modinjapan.com/mahle-ori...er-g31624.html

For setup recommendations, availability, or formal quotes, email sales@modinjapan.com. ]]> ES - 1st to 6th Gen (1990-2018) ModInJapan https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051880-es-1st-to-6th-gen-1990-2018-engine-and-intake-options-from-mod-in-japan.html <![CDATA[Lexus ES - 1st to 6th Gen (1990-2018) Suspension & Handling Options from Mod in Japan]]> https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051859-lexus-es-1st-to-6th-gen-1990-2018-suspension-and-handling-options-from-mod-in-japan-new-post.html Tue, 26 May 2026 20:20:44 GMT Hey everyone, Mod in Japan carries suspension and handling upgrades for the Lexus ES - 1st to 6th Gen (1990-2018). Below is a quick guide grouped by upgrade type so you can choose the right setup... Hey everyone, Mod in Japan carries suspension and handling upgrades for the Lexus ES
- 1st to 6th Gen (1990-2018). Below is a quick guide grouped by upgrade type so you
can choose the right setup for stance, comfort, handling, or off-road use depending on
the chassis.

Pricing note: Some brands restrict advertised pricing online. For our best available
price, please click “Request Quote” on the product page and we’ll follow up with the best
deal we can offer.

Questions? Email us at sales@modinjapan.com and we’ll help you choose the
right setup.

Need a formal quote? Please email sales@modinjapan.com with your full name,
email address, phone number, billing address, and shipping address. We’ll email you a
formal quote that you can review and use to complete checkout.

Fitment note: Always confirm model year, drivetrain, trim, wheel/tire setup, ride
height goals, and whether the vehicle has adaptive suspension, air suspension, KDSS, or
other factory suspension options before ordering.

Quick Suspension Buying Guide

Lowering Springs: Best first upgrade for better stance, reduced wheel gap, and a
mild handling improvement.

Coilovers: Best choice if you want adjustable ride height, sharper handling, and
more control over the car’s setup.

Shocks / Dampers: Best for restoring ride quality or upgrading damping without
changing the full suspension layout.

Strut Bars / Chassis Braces: Help improve steering response and chassis feel.

Sway Bars / End Links: Help reduce body roll and improve cornering balance.

Control Arms / Bushings / Alignment Parts: Important for lowered cars, high-
mileage cars, and customers who want better tire wear and alignment control.

Quick Recommendations

Best use case: Comfort restoration and maintenance
Best handling refresh: Control arm bushings + sway bar links
Best replacement shock option: KYB Excel-G struts
Best 2013-2018 hybrid refresh: MOOG front lower control arms
Best older ES upgrade: Whiteline bushings and rear sway bar links

Bushings & Sway Bar Links

Whiteline Front Lower Inner Front Control Arm Bushing Kit for Lexus ES300
Type: Control arm bushing
Best For: Older ES front-end refresh
SKU: whlW51720A
Product URL:
https://www.modinjapan.com/whiteline...front-bushing-
front-w51720a-whit-w51720a.html
Whiteline Front Lower Inner Rear Control Arm Bushing Kit for Lexus ES300
Type: Control arm bushing
Best For: Older ES handling refresh
SKU: whlW51721
Product URL:
https://www.modinjapan.com/whiteline...-rear-bushing-
front-w51721-whit-w51721.html
Whiteline Steering Rack & Pinion Mount Bushing for Lexus ES / Toyota Camry
Type: Steering rack bushing
Best For: Tighter steering feel
SKU: whlW11722
Product URL:
https://www.modinjapan.com/whiteline...bushing-front-
w11722-whit-w11722.html
Whiteline Rear Swaybar Link Assembly Kit for 1992-2001 Lexus ES
Type: Sway bar links
Best For: Rear sway bar service
SKU: whlKLC187
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/131054/

Replacement Struts & Control Arms

KYB Excel-G Front Right Strut for Lexus ES300
Type: Replacement strut
Best For: Comfort ride restoration
SKU: kyb334245
Product URL:
https://www.modinjapan.com/kyb-shock...yb-334245.html
KYB Excel-G Front Right Strut for Lexus ES330
Type: Replacement strut
Best For: OE-style replacement
SKU: kyb334386
Product URL:
https://www.modinjapan.com/kyb-shock...yb-334386.html
KYB Excel-G Rear Right Strut for Lexus ES330
Type: Replacement strut
Best For: Rear ride restoration
SKU: kyb334388
Product URL:
https://www.modinjapan.com/kyb-shock...yb-334388.html
MOOG Front Left Lower Control Arm for 2013-2018 Lexus ES300h
Type: Lower control arm
Best For: High-mileage suspension repair
SKU: mohRK621477
Product URL:
https://www.modinjapan.com/moog-13-1...r-control-arm-
rk621477.html

For setup recommendations, availability, or formal quotes, email
sales@modinjapan.com.
]]> ES - 1st to 6th Gen (1990-2018) ModInJapan https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051859-lexus-es-1st-to-6th-gen-1990-2018-suspension-and-handling-options-from-mod-in-japan.html ES - 1st to 6th Gen (1990-2018) Exhaust Options from Mod in Japan https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051832-es-1st-to-6th-gen-1990-2018-exhaust-options-from-mod-in-japan-new-post.html Tue, 26 May 2026 17:42:18 GMT Hey everyone, Mod in Japan carries exhaust and exhaust-related options for the ES - 1st to 6th Gen (1990-2018). Below is a quick buyer guide grouped around how most owners shop: daily-driver sound,... Hey everyone, Mod in Japan carries exhaust and exhaust-related options for the ES - 1st to 6th Gen (1990-2018). Below is a quick buyer guide grouped around how most owners shop: daily-driver sound, aggressive sound, valved systems, midpipes/front pipes, headers, and premium materials.

Pricing note: Some brands restrict advertised pricing online. For our best available price, please click “Request Quote” on the product page and we’ll follow up with the best deal we can offer.

Questions? Email us at sales@modinjapan.com and we’ll help you choose the right setup.

Need a formal quote? Please email sales@modinjapan.com with your full name, email address, phone number, billing address, and shipping address. We’ll email you a formal quote that you can review and use to complete checkout.

Sound level note: Volume ratings are general estimates. Final sound level depends on the full combination of parts. Axleback-only setups are usually more manageable. Adding midpipes, downpipes, headers, or catless components will increase volume.

Fitment note: Always confirm model year, engine, drivetrain, trim, F Sport package, wheelbase, emissions requirements, and bumper/exhaust tip fitment before ordering.

Quick ES - 1st to 6th Gen (1990-2018) Exhaust Buying Guide

Axleback / Rear Section: Best first upgrade. Changes the rear muffler section and gives the vehicle more sound without replacing the full exhaust.

Catback: More complete system that typically includes more piping and a larger sound/appearance change than an axleback.

Midpipe / Front Pipe: Adds volume and changes tone. Resonated versions are smoother and better for daily driving. Non-resonated or catless versions are louder and more aggressive.

Headers / Exhaust Manifolds: Biggest sound and performance change, but also the most involved install. These may affect emissions compliance depending on your location.

Valved Exhaust: Best choice if you want quiet cruising and louder sound when opened.

Non-Valved Exhaust: Best choice if you want a simpler setup and consistent sound all the time.

Stainless Steel: Durable, strong value, and usually lower cost than titanium.

Titanium: Lighter weight, premium finish, and often a sharper, more exotic tone.

Quick Recommendations

Best daily driver: Axleback or touring catback with moderate volume

Best aggressive setup: Louder axleback, catback, or non-resonated setup

Best valved setup: Valved exhaust if available, or quote-based special order

Best titanium option: Titanium exhaust if available for this chassis

Best midpipe / front pipe upgrade: Resonated midpipe for smoother sound, non-resonated for more volume

Best maximum sound setup: MAHLE Original Lexus ES350 Exhaust Manifold Set, where emissions rules allow

BRExhaust

BRExhaust Exhaust Kit - 13-16 Lexus ES350 3.5L - 106-0827

Type: Exhaust component

Volume: Medium

Best For: Street performance upgrade

SKU: mag106-0827

MSRP: 1,118.00 USD

Product URL:


MAHLE

MAHLE Original Lexus ES350 12-07 Exhaust Manifold Set - MS19722

Type: Headers / exhaust manifold

Volume: Medium

Best For: Maximum sound and performance

SKU: vicMS19722

MSRP: 46.39 USD

Product URL:


MAHLE Original Lexus ES300 03-94 Exhaust Manifold Gasket - MS16344

Type: Headers / exhaust manifold

Volume: Medium

Best For: Maximum sound and performance

SKU: vicMS16344

MSRP: 56.84 USD

Product URL:


MAHLE Original Lexus ES350 13-07 Intake Manifold Set - MS19675

Type: Headers / exhaust manifold

Volume: Medium

Best For: Maximum sound and performance

SKU: vicMS19675

MSRP: 106.91 USD

Product URL:


MAHLE Original Lexus ES300 03-94 Intake Manifold Set - MS16348

Type: Headers / exhaust manifold

Volume: Medium

Best For: Maximum sound and performance

SKU: vicMS16348

MSRP: 222.56 USD

Product URL:


MagnaFlow

MagnaFlow Conv DF 07-10 Lexus ES350 / 07-10 Toyota Camry 3.5L Y-Pipe Assembly (49 State) - 49712

Type: Exhaust component

Volume: Medium

Best For: Street performance upgrade

SKU: mag49712

MSRP: 587.00 USD

Product URL:


MagnaFlow Conv DF 02-03 Lexus ES300 3.0L Manifold - 50260

Type: Headers / exhaust manifold

Volume: Medium

Best For: Maximum sound and performance

SKU: mag50260

MSRP: 747.00 USD

Product URL:

For setup recommendations, availability, or formal quotes, email sales@modinjapan.com. ]]> ES - 1st to 6th Gen (1990-2018) ModInJapan https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051832-es-1st-to-6th-gen-1990-2018-exhaust-options-from-mod-in-japan.html 2002 ES 300 Rear Struts https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051818-2002-es-300-rear-struts-new-post.html Tue, 26 May 2026 17:03:32 GMT I am trying to replace the rear struts on a 2003 ES 300 for a friend. The right rear wheel detached from the strut (see picture below). I bought replacement struts from RockAuto (without adaptive... I am trying to replace the rear struts on a 2003 ES 300 for a friend. The right rear wheel detached from the strut (see picture below). I bought replacement struts from RockAuto (without adaptive variable suspension, because I didn't know which it was).




These did not fit as the knuckle mounting holes were too close together (see other pictures below). I now have to return these but I am not sure which to buy that will actually fit.

Any help would be appreciated.



]]> ES - 1st to 6th Gen (1990-2018) clmoffatt https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051818-2002-es-300-rear-struts.html <![CDATA[ES - 1st to 6th Gen (1990-2018) Drivetrain & Transmission Options from Mod in Japan]]> https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051794-es-1st-to-6th-gen-1990-2018-drivetrain-and-transmission-options-from-mod-in-japan-new-post.html Tue, 26 May 2026 15:46:36 GMT Hey everyone, Mod in Japan can help with drivetrain and transmission options for the ES - 1st to 6th Gen (1990-2018). This section is focused on ES owners looking for clutch, flywheel, and... Hey everyone, Mod in Japan can help with drivetrain and transmission options for the
ES - 1st to 6th Gen (1990-2018). This section is focused on ES owners looking for
clutch, flywheel, and replacement drivetrain support on older manual-compatible
platforms, plus quote-based parts for later automatic models.

Pricing note: Some brands restrict advertised pricing online. For our best available
price, please click “Request Quote” on the product page and we’ll follow up with the best
deal we can offer.

Questions? Email us at sales@modinjapan.com and we’ll help you choose the
right drivetrain or transmission setup.

Need a formal quote? Please email sales@modinjapan.com with your full name,
email address, phone number, billing address, and shipping address. We’ll email you a
formal quote that you can review and use to complete checkout.

Fitment note: Always confirm year, trim, engine, transmission, RWD/AWD/4WD,
hybrid/non-hybrid status, differential type, and intended use before ordering. Drivetrain
and transmission parts are highly fitment-sensitive.

Quick Drivetrain & Transmission Buying Guide

Clutch Kits: Best for manual-transmission cars that need more holding power, a
replacement clutch, or a setup matched to engine upgrades.

Flywheels: Best for manual cars when refreshing the clutch system or improving
engine response. Lightweight flywheels can make the car feel more responsive but may
add drivability tradeoffs.

Limited Slip Differentials / LSD: Best for rear-wheel-drive performance builds that
need better traction, more predictable rotation, and stronger corner-exit grip.

Differential Bushings & Mounts: Best for reducing drivetrain movement, rear-end
clunk, and vague power delivery. These are strong add-ons for older chassis and
performance cars.

Differential Drop Kits: Best for lifted GX/LX/off-road platforms where front
driveline angles need correction.

Shifters & Transmission Accessories: Best for improving manual shift feel or
supporting a transmission refresh.

Service / Rebuild Parts: Best for older vehicles, high-mileage vehicles, off-road
builds, and restoration projects where reliability is the priority.


Quick Recommendations

Best manual-transmission refresh: Clutch kit + flywheel + proper fluid service
Best performance manual setup: Upgraded clutch + lightweight flywheel + short
shifter
Best rear-wheel-drive handling upgrade: Limited slip differential + differential
bushings
Best older chassis upgrade: Differential bushings, mounts, and service parts
Best off-road drivetrain support: Differential drop kit where applicable
Best quote-based approach: Email sales@modinjapan.com with VIN, year, trim,
drivetrain, and intended use


Clutch Kits

XClutch 90-91 Lexus ES250 Base 2.5L Chromoly Flywheel - XFTY001C
Type: Clutch kit
Best For: Sharper rev response and manual-transmission refresh builds
SKU: xclXFTY001C
Price: 451.07 USD
Product URL:
https://www.modinjapan.com/xclutch-9...moly-flywheel-
xfty001c.html

Clutch Masters 88-89 Toyota Celica 2.0L T 4WD / 88-91 Toyota Camry 2.0L-4WD 2.5L
/ 90-91 Lexus ES250 - 16061-HDB6
Type: Clutch kit
Best For: Fitment-confirmed drivetrain support
SKU: clm16061-HDB6
Price: 552.50 USD
Product URL:
https://www.modinjapan.com/clutch-ma...l-t-4wd-88-91-
toyota-camry-2-0l-4wd-2-5l-90-91-lexus-es250-16061-hdb6.html

Clutch Masters 88-89 Toyota Celica 2.0L T 4WD / 88-91 Toyota Camry 2.0L-4WD 2.5L
/ 90-91 Lexus ES250 - 16061-HDC6
Type: Clutch kit
Best For: Fitment-confirmed drivetrain support
SKU: clm16061-HDC6
Price: 552.50 USD
Product URL:
https://www.modinjapan.com/catalog/p...iew/id/127096/

Clutch Masters 88-89 Toyota Celica 2.0L T 4WD / 88-91 Toyota Camry 2.0L-4WD 2.5L
/ 90-91 Lexus ES250 - 16061-HDTZ
Type: Clutch kit
Best For: Fitment-confirmed drivetrain support
SKU: clm16061-HDTZ
Price: 616.25 USD
Product URL:
https://www.modinjapan.com/clutch-ma...l-t-4wd-88-91-
toyota-camry-2-0l-4wd-2-5l-90-91-lexus-es250-16061-hdtz.html

Exedy 1992-1993 Lexus ES300 V6 Stage 1 Organic Clutch - 16803A
Type: Clutch kit
Best For: Street replacement or mild performance clutch upgrade
SKU: exe16803A
Price: 704.18 USD
Product URL:
https://www.modinjapan.com/exedy-199...rganic-clutch-
16803a.html


Flywheels

Fidanza 90-91 Lexus ES 250 Aluminum Flywheel - 130881
Type: Flywheel
Best For: Sharper rev response and manual-transmission refresh builds
SKU: fid130881
Price: 346.49 USD
Product URL:
https://www.modinjapan.com/fidanza-9...inum-flywheel-
130881.html


For setup recommendations, availability, or formal quotes, email
sales@modinjapan.com.
]]> ES - 1st to 6th Gen (1990-2018) ModInJapan https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051794-es-1st-to-6th-gen-1990-2018-drivetrain-and-transmission-options-from-mod-in-japan.html Voltage Booster Required? https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051712-voltage-booster-required-new-post.html Sun, 24 May 2026 01:26:44 GMT Hello, I wished to upgrade to an AGM battery, as I plan on upgrading my 2016 Lexus ES350 with the following: 1. Apple CarPlay + Android Auto upgrade kit (possible upgrade to larger Lexus... Hello,

I wished to upgrade to an AGM battery, as I plan on upgrading my 2016 Lexus ES350 with the following:

1. Apple CarPlay + Android Auto upgrade kit (possible upgrade to larger Lexus infotainment screen - though not sure at the moment)
2. 3 channel dashcam (front, telephoto and cabin)
3. 4 camera Mobile DVR (with 360 view)
4. Illuminated door sills + trunk sill
5. Rear view mirror camera upgrade kit (possibly - depending on how well integrated it is)

The upgrades are to make my car a bit more modern, as the car itself has been great and extremely reliable.

I've seen that AGM batteries require more power from the alternator to fully charge, and have seen people using voltage boosters.

I found 2 voltage boosters:

1. H113-L-2 Voltage boost harness - https://www.mechman.com/h113-l-2-vol...agm-batteries/
2. Voltage Booster PRO - https://voltageboosterpro.com/product/og/

The first is made to Lexus/Toyota spec (and is a cable that replaces the OEM cable coming from the alternator), while the second is like a fuse tap that sits in your fuse box.

When I contacted the people at Voltage Booster, they stated that their voltage booster was not tested on the Lexus ES350.

Whereas the H113-L-2 list the ES350 as being compatible.

I would assume both should work, but was curious which voltage booster you would all recommend?

Also, is a voltage booster even necessary (as I've read that the 2016 Lexus ES350 doesn't output enough voltage to properly charge an AGM battery per the AGM battery spec).

With all the electronics I plan on adding, I'm pretty certain I need to go with an AGM battery.

Plus, I rarely drive my vehicle (sometimes only on weekends as I tend to work remotely).

The AGM battery would seem like a good buy given my use case, but am worried that either voltage booster could damage the alternator, electronics or something else.

Any thoughts?

Thank you,
Nelson
]]> ES - 1st to 6th Gen (1990-2018) 2016ES350 https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051712-voltage-booster-required.html Double click key fob https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051707-double-click-key-fob-new-post.html Sun, 24 May 2026 00:05:21 GMT Hi. I have two key fobs for my 99 ES300. One of them is fine with a single click of the buttons. The other one requires that i press the button twice. I have to quickly double click and hold. ... Hi. I have two key fobs for my 99 ES300. One of them is fine with a single click of the buttons. The other one requires that i press the button twice. I have to quickly double click and hold. Plus, I don't think that doing it a second time will unlock the other doors. I couldn't find anything remotely similar with a Google search, only that a single click will unlock and a second click will unlock the rest of the doors. Google doesn't seem to understand my issue. Help is appreciated. ]]> ES - 1st to 6th Gen (1990-2018) Mgordon1100 https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051707-double-click-key-fob.html 1999 ES 300 Coach Edition Wheels https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051667-1999-es-300-coach-edition-wheels-new-post.html Fri, 22 May 2026 17:05:04 GMT Hello Lexus ES Enthusiasts,

I have a set of 15" five-spoke wheels for the 1999 ES 300 Coach Edition. If I understand correctly this design of wheel was only available on Coach Edition versions of the XV20 for the 1999 model year. I'm looking to sell them and I'm wondering what people think the value of them is and if there is interest.






As you can see, they are not near perfect condition, with a fair share of small scratches and scuffs evenly distributed evenly throughout the set of four, no curb rash/chunks missing though. You wouldn't notice from a distance ofc. They are perhaps good for their age.

They used to be fitted to our Pearl White 1992 XV10 with summer tires, where I think they looked really good:



If there is interest, I will post them on the Marketplace / Classifieds forum thread. I am hoping that they can go to a good, loving, Lexus enthusiast's home.
]]> ES - 1st to 6th Gen (1990-2018) V8FourCam32 https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051667-1999-es-300-coach-edition-wheels.html <![CDATA[2016 ES350 2 Current Issues I am Having. Headlight & Trunk.]]> https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051625-2016-es350-2-current-issues-i-am-having-headlight-and-trunk-new-post.html Thu, 21 May 2026 11:13:07 GMT First issue, I have the dreaded condensation in my passenger headlight, I recently got the “headlight malfunction warning-see dealer”, from what I see, it’s not completely out, it’s running dim & occasionally does flicker. My question is, do I need a whole entire headlight? Or is it something smaller I can do to fix myself, maybe just the bulb, etc. I am expecting to pay $2000 at the dealership given research (I want OEM & the job done right IF I have to go this route). See pics.

second issue, I have water in the left side of my trunk after every rain. I understand the possibilities of what it could be (sunroof, taillight gasket, weatherstripping etc). From your experience, what was your issue & solution?




The brown isn’t rust, it is just debris. Trying to prevent that issue though! for anyone who actually dealt with & fixed the issue, what was causing it for you? See pics as well.

I appreciate you all in advance!
]]> ES - 1st to 6th Gen (1990-2018) Tone6r https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051625-2016-es350-2-current-issues-i-am-having-headlight-and-trunk.html Door trim coming off https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051551-door-trim-coming-off-new-post.html Mon, 18 May 2026 03:15:01 GMT Have a '09 ES that we got recently and the driver's door lower trim panel started coming off. I see the white clips that I think I've found on amazon that might work. However, I have a question about the black section at the end. It seems like that part might have been a part of the actual trim piece and has broken off. I can' seem to find any information to confirm that or not. Anyone know if that black piece is supposed to be attached to the trim piece and if it might be able to replaced, hopefully without replacing the whole trim. Worst case, I'm thinking about replacing the white clips and then using 3M double back tape on that black piece to hopefully hold it to the back of the trim.


]]> ES - 1st to 6th Gen (1990-2018) caverman https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051551-door-trim-coming-off.html Rear valve cover gasket - tiny leak https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051532-rear-valve-cover-gasket-tiny-leak-new-post.html Sun, 17 May 2026 14:36:00 GMT What did I skip or what am I missing? I recently did the rear VCG to deal with a modest leak. I used a stack of two washers to make certain the bolts did not bottom out when I torqued them. I... What did I skip or what am I missing?

I recently did the rear VCG to deal with a modest leak. I used a stack of two washers to make certain the bolts did not bottom out when I torqued them. I then let the car sit for 24 hours and re-torqued them. I did not run the engine, I just let things sit. Not much change.

I am stuck with a tiny 1 drop per day leak coming off the middle bolt area of the short driver's side edge. It is really annoying on a concrete driveway with an active HOA.

Did I miss a spot for rtv? I went underneath and checked the bolts and nothing is loose.

Thanks in advance. ]]> ES - 1st to 6th Gen (1990-2018) das1960 https://www.clublexus.com/forums/es-1st-to-6th-gen-1990-2018/1051532-rear-valve-cover-gasket-tiny-leak.html