2014 es300h upgrading to 2016 es300 model
#1
Driver School Candidate
Thread Starter
2014 es300h upgrading to 2016 es300 model
Hi guys I want to ask a noob question I had my 2014 Lexus es300h for over 3 years and I like the car and I won't let it go my question is can I upgrade the front end headlights complete bumper and the rear taillights I couldn't find any thread on here so I want to ask has any one had any suggestions what parts works and if it's been done so I could start looking for parts Thanks inadvance guys and gals!
Last edited by hybirdjdm; 06-22-17 at 01:30 AM. Reason: Fixing my sentence
#2
Lexus Fanatic
Sure, you can do anything if you have enough money.
This will be VERY expensive, as the lamp modules are likely $1,500 each, so that's potentially $5-6k just in lights, then parts, painting, etc. Cheaper to just trade it on a 16-17.
This will be VERY expensive, as the lamp modules are likely $1,500 each, so that's potentially $5-6k just in lights, then parts, painting, etc. Cheaper to just trade it on a 16-17.
#3
Driver School Candidate
Thread Starter
@se15ls I see your point be expansive to buy all the parts but my car I just paided it off and don't want to get back in paying payments so appreciate your reply though
#4
Lexus Fanatic
The other side of this swap is it will actually hurt your resale value on your 14, so its a double hit. It just doesn't make sense to do this.
The following users liked this post:
hybirdjdm (06-22-17)
#5
Lexus Test Driver
The rear taillights could be a straight swap because the rear bumper and sheet metal wasn't changed for 2016. I'd skip the front, you'd need new parts for everything in front of the bonnet.
The following users liked this post:
hybirdjdm (06-22-17)
Thread
Thread Starter
Forum
Replies
Last Post
campoida
ES - 1st to 4th Gen (1990-2006)
1
04-14-09 09:53 PM
acaprice
ES - 1st to 4th Gen (1990-2006)
3
10-01-01 03:39 PM