ES - 6th Gen (2013-2018) Discussion topics related to 2013+ ES models

Pics of your ES -- RIGHT NOW!!

Thread Tools
 
Search this Thread
 
Old 02-21-17, 01:23 PM
  #436  
400to300H
Driver
 
400to300H's Avatar
 
Join Date: Dec 2016
Location: OR
Posts: 154
Received 13 Likes on 12 Posts
Default

Installed TSW "Willow" 18" rims on the ES300 today. Rims came mounted with Goodyear "Fierce Instinct" tires with about 70% tread remaining. Tires/wheels were $400 off craigslist and it was $160 to swap my TPMS sensors, check balance and install them on car. Also pictured is my 30% tint that was installed back in November, car as purchased pic included for comparison...




Old 02-22-17, 10:06 AM
  #437  
Need4Speed
Former Sponsor
 
Need4Speed's Avatar
 
Join Date: May 2013
Location: CA
Posts: 6,388
Received 54 Likes on 52 Posts
Default

Very clean and classy! Feel free to PM if you ever have any mod questions.
Old 02-22-17, 10:45 AM
  #438  
400to300H
Driver
 
400to300H's Avatar
 
Join Date: Dec 2016
Location: OR
Posts: 154
Received 13 Likes on 12 Posts
Default

Thanks Need, just might take you up on that.

Ahhhh, debadged. Just the two "Hybrid" badges on the sides. I think they ruin the lines of the car (albeit in a small way) and I found them to be generally annoying (in a bigger way than is likely healthy). Front and rear badging remains intact. Only other mod plans I have would be to lower it an inch or two but that's not really in the budget at the moment, in the future Im sure. When summer rolls around Ill be doing paint correction; getting all the scratches out of the clear coat, polishing and finally waxing. Very successful with my former LS400 and my weekender Porsche so would imagine the ES300 will greatly benefit, the clear coat is in pretty sad shape.


Last edited by 400to300H; 02-22-17 at 11:03 AM.
Old 02-22-17, 11:16 AM
  #439  
lesz
Lead Lap
 
lesz's Avatar
 
Join Date: Aug 2013
Location: Illinois
Posts: 4,279
Received 1,010 Likes on 691 Posts
Default

When I bought my new 2017 ES around Thanksgiving, the plan was, once the snow started to fall, to keep it in the garage until the salt and rock chips that are used here to treat the roads were gone from the roads some time in March. But, it has been an especially mile winter, and I started driving the car again about a month sooner than I had originally planned.

I just gave it a wash about an hour ago. I figured that I'd take a couple of pictures because it won't be long before the front of the car is plastered with bugs.
Attached Thumbnails Pics of your ES -- RIGHT NOW!!-img_8902-2017-es-2-22-17.jpg   Pics of your ES -- RIGHT NOW!!-img_8904-2017-es-2-22-17.jpg  
Old 02-23-17, 04:49 AM
  #440  
Mike728
Lead Lap
 
Mike728's Avatar
 
Join Date: Mar 2013
Location: IL
Posts: 4,714
Received 615 Likes on 463 Posts
Default

Originally Posted by lesz
When I bought my new 2017 ES around Thanksgiving, the plan was, once the snow started to fall, to keep it in the garage until the salt and rock chips that are used here to treat the roads were gone from the roads some time in March. But, it has been an especially mile winter, and I started driving the car again about a month sooner than I had originally planned.

I just gave it a wash about an hour ago. I figured that I'd take a couple of pictures because it won't be long before the front of the car is plastered with bugs.
Looks great!

I would imagine bugs are less of an issue with that grill.
Old 02-23-17, 10:26 AM
  #441  
Need4Speed
Former Sponsor
 
Need4Speed's Avatar
 
Join Date: May 2013
Location: CA
Posts: 6,388
Received 54 Likes on 52 Posts
Default

Originally Posted by 400to300H
Thanks Need, just might take you up on that.

Ahhhh, debadged. Just the two "Hybrid" badges on the sides. I think they ruin the lines of the car (albeit in a small way) and I found them to be generally annoying (in a bigger way than is likely healthy). Front and rear badging remains intact. Only other mod plans I have would be to lower it an inch or two but that's not really in the budget at the moment, in the future Im sure. When summer rolls around Ill be doing paint correction; getting all the scratches out of the clear coat, polishing and finally waxing. Very successful with my former LS400 and my weekender Porsche so would imagine the ES300 will greatly benefit, the clear coat is in pretty sad shape.

Sounds great! We're just one PM away.
Old 02-23-17, 10:27 AM
  #442  
Need4Speed
Former Sponsor
 
Need4Speed's Avatar
 
Join Date: May 2013
Location: CA
Posts: 6,388
Received 54 Likes on 52 Posts
Default

Originally Posted by lesz
When I bought my new 2017 ES around Thanksgiving, the plan was, once the snow started to fall, to keep it in the garage until the salt and rock chips that are used here to treat the roads were gone from the roads some time in March. But, it has been an especially mile winter, and I started driving the car again about a month sooner than I had originally planned.

I just gave it a wash about an hour ago. I figured that I'd take a couple of pictures because it won't be long before the front of the car is plastered with bugs.
Fresh wash is always good. Thank you for sharing! Feel free to PM if you ever have any mod questions.
Old 02-25-17, 09:37 PM
  #443  
R1alex
Driver School Candidate
 
R1alex's Avatar
 
Join Date: Jan 2017
Location: FL
Posts: 23
Likes: 0
Received 3 Likes on 2 Posts
Default

Originally Posted by Need4Speed
Fresh wash is always good. Thank you for sharing! Feel free to PM if you ever have any mod questions.
thanks to Tiko @ Need4Speed motors. Got me an incredible deal on my 20" Stance SF03's. They look nasty! Get a lot of looks at every red light!! Car is lowered. They matched my offset perfect to where the wheels are flush with my fenders with no spacers needed. Couldn't be happier. Good people, Great service!!
Attached Thumbnails Pics of your ES -- RIGHT NOW!!-img_3258.jpg   Pics of your ES -- RIGHT NOW!!-img_3259.jpg   Pics of your ES -- RIGHT NOW!!-img_3246.jpg   Pics of your ES -- RIGHT NOW!!-img_3263.jpg  
Old 02-25-17, 09:46 PM
  #444  
BigRon12
Rookie
 
BigRon12's Avatar
 
Join Date: Aug 2016
Location: Michigan
Posts: 58
Received 3 Likes on 3 Posts
Default

Originally Posted by R1alex
thanks to Tiko @ Need4Speed motors. Got me an incredible deal on my 20" Stance SF03's. They look nasty! Get a lot of looks at every red light!! Car is lowered. They matched my offset perfect to where the wheels are flush with my fenders with no spacers needed. Couldn't be happier. Good people, Great service!!
Those look sharp!

Are you on coilovers or springs?

Also how does the car ride with the 20's...? Curious because I have the factory 18's with ultra high performance all season tires and it rides slightly firm.
Old 02-25-17, 09:58 PM
  #445  
R1alex
Driver School Candidate
 
R1alex's Avatar
 
Join Date: Jan 2017
Location: FL
Posts: 23
Likes: 0
Received 3 Likes on 2 Posts
Default

Originally Posted by BigRon12
Those look sharp!

Are you on coilovers or springs?

Also how does the car ride with the 20's...? Curious because I have the factory 18's with ultra high performance all season tires and it rides slightly firm.
just a set of H&R 1.4" Springs. Honestly, I had the 17" OEM WHEELS with the Bridgestone tires and even though these are ultra low profile 245/35/20 tires, with the nice Michelin Pilot Super Sports, they don't feel much different. The quality of the tire makes a huge difference in ride comfort. It's a little stiffer then stock suspension, but ride very nice.
Old 02-27-17, 10:25 AM
  #446  
Need4Speed
Former Sponsor
 
Need4Speed's Avatar
 
Join Date: May 2013
Location: CA
Posts: 6,388
Received 54 Likes on 52 Posts
Default

Originally Posted by R1alex
thanks to Tiko @ Need4Speed motors. Got me an incredible deal on my 20" Stance SF03's. They look nasty! Get a lot of looks at every red light!! Car is lowered. They matched my offset perfect to where the wheels are flush with my fenders with no spacers needed. Couldn't be happier. Good people, Great service!!
Wow this thing looks fire! Thank you for the support and giving us the opportunity to assist you with this bad boy.
Old 02-27-17, 10:26 AM
  #447  
Need4Speed
Former Sponsor
 
Need4Speed's Avatar
 
Join Date: May 2013
Location: CA
Posts: 6,388
Received 54 Likes on 52 Posts
Default

Originally Posted by BigRon12
Those look sharp!

Are you on coilovers or springs?

Also how does the car ride with the 20's...? Curious because I have the factory 18's with ultra high performance all season tires and it rides slightly firm.
Just sent you a PM.
Old 03-07-17, 06:32 PM
  #448  
VuVewVoo
Driver School Candidate
 
VuVewVoo's Avatar
 
Join Date: Oct 2009
Location: TX
Posts: 27
Likes: 0
Received 2 Likes on 2 Posts
Default

Just picked her up Saturday and had tint put on today



The following users liked this post:
USALV (03-09-17)
Old 03-07-17, 08:52 PM
  #449  
400to300H
Driver
 
400to300H's Avatar
 
Join Date: Dec 2016
Location: OR
Posts: 154
Received 13 Likes on 12 Posts
Default

Holy crap that's dark. If I didn't think it makes for a rolling citation machine I would have gone that dark, looks really good.
The following users liked this post:
USALV (03-09-17)
Old 03-08-17, 11:57 AM
  #450  
VuVewVoo
Driver School Candidate
 
VuVewVoo's Avatar
 
Join Date: Oct 2009
Location: TX
Posts: 27
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by 400to300H
Holy crap that's dark. If I didn't think it makes for a rolling citation machine I would have gone that dark, looks really good.

It looks darker than it actually is. It is 35% in the front and 15% in the back. Completely legal in Texas
The following users liked this post:
USALV (03-09-17)


Quick Reply: Pics of your ES -- RIGHT NOW!!



All times are GMT -7. The time now is 04:37 AM.