Front seat headrest adjustment
Thread Starter
Driver School Candidate
Joined: Oct 2018
Posts: 1
Likes: 0
From: NY
Front seat headrest adjustment
Does anyone know how to adjust the headrest in the Lexus ES 350 2017? It is pushing my head and neck forward making me very uncomfortable? There must be some button to press to adjust the headrest, but I don't see it. Any help would be very much appreciated! Thank you.
Advanced
Joined: Dec 2017
Posts: 621
Likes: 114
From: 🇨🇦
2nd gear
Joined: Jun 2024
Posts: 2
Likes: 1
Help! I've just purchased a 2017 ES 350 and the front headrest will not adjust forward and backward (only up and down). Is there a solution such as a) switching out the front and rear headrests as they are different shapes, or b) find another Lexus model that does have adjustable headrests and replace mine with this?
Instructor
Joined: Mar 2019
Posts: 1,246
Likes: 422
From: Alberta
Help! I've just purchased a 2017 ES 350 and the front headrest will not adjust forward and backward (only up and down). Is there a solution such as a) switching out the front and rear headrests as they are different shapes, or b) find another Lexus model that does have adjustable headrests and replace mine with this?
Pit Crew
Joined: Feb 2022
Posts: 133
Likes: 44
From: California
sorry just saw it was an old post....
from 7-1-23 and still working
Sorry if this is off topic using a 6th gen. example. At the time I was desperate!
I have a 2022 ES300h UL . The headrest is OK, However I also have a 2018 ES300h premium for the wife.
The 2018 headrests were too far forward. Out of desperation I pulled out headrest, put it in my wood vice up side down and took the cover off, a real pain.
Then unscrewed the plastic frame (screws are under the foam, use fingers to find screws) to get to the mechanism. What I found was an old style three-click headrest (remember? pull forward and it moved into different positions going back). It was in the forward position. I put my screwdriver in the ratchet area, played with it. It released and moved to the back position. I was shocked but happy.
Putting it back together was hard because the buttons on the cover were so tight. I ended up using double-sided tape and pushed the headrest down so nothing was visible.
I am no pro, but this allowed me to keep car and be comfortable.
Hope this work-around helps, Good Luck!
2nd gear
Joined: Jun 2024
Posts: 2
Likes: 1
Originally Posted by bullnobull
sorry just saw it was an old post....
from 7-1-23 and still working
Sorry if this is off topic using a 6th gen. example. At the time I was desperate!
I have a 2022 ES300h UL . The headrest is OK, However I also have a 2018 ES300h premium for the wife.
The 2018 headrests were too far forward. Out of desperation I pulled out headrest, put it in my wood vice up side down and took the cover off, a real pain.
Then unscrewed the plastic frame (screws are under the foam, use fingers to find screws) to get to the mechanism. What I found was an old style three-click headrest (remember? pull forward and it moved into different positions going back). It was in the forward position. I put my screwdriver in the ratchet area, played with it. It released and moved to the back position. I was shocked but happy.
Putting it back together was hard because the buttons on the cover were so tight. I ended up using double-sided tape and pushed the headrest down so nothing was visible.
I am no pro, but this allowed me to keep car and be comfortable.
Hope this work-around helps, Good Luck!
sorry just saw it was an old post....
from 7-1-23 and still working
Sorry if this is off topic using a 6th gen. example. At the time I was desperate!
I have a 2022 ES300h UL . The headrest is OK, However I also have a 2018 ES300h premium for the wife.
The 2018 headrests were too far forward. Out of desperation I pulled out headrest, put it in my wood vice up side down and took the cover off, a real pain.
Then unscrewed the plastic frame (screws are under the foam, use fingers to find screws) to get to the mechanism. What I found was an old style three-click headrest (remember? pull forward and it moved into different positions going back). It was in the forward position. I put my screwdriver in the ratchet area, played with it. It released and moved to the back position. I was shocked but happy.
Putting it back together was hard because the buttons on the cover were so tight. I ended up using double-sided tape and pushed the headrest down so nothing was visible.
I am no pro, but this allowed me to keep car and be comfortable.
Hope this work-around helps, Good Luck!
Thread
Thread Starter
Forum
Replies
Last Post