When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just installed LED fog lights this past weekend and they look much better than the stock bulbs. Took about 30 minutes to install. Haven't tested them at night, but not really expecting big difference in performance. Just happy it matches the stock HID headlights now. I ordered the bulbs off Amazon:https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
I actually have the bulbs but never tried installing them. Thought that one had to remove the splash shield under the car. Wheel wells make more sense. I'll try it in the Spring.
Thanks Mike...
Looks great. I put some on mine to match my HID headlights. The color matching in the evening makes the car look cleaner. If only I could get brave enough to change the approach lights under the side mirrors to match as well.
Were you able to gain access through the wheel wells? Such as it is described in the manual?
I did not go through the wheel well. I removed the bolts from the front of the splash shield and then was able to pull the front down to reach the bulbs. Was relatively easy.
Yoder - The Amazon link says these bulbs don't fit my 14 ES 350. I also saw the fog light bulbs are H16, not H11. What's up? Thanks!
BTW - My low beams are 4500k HIDs from Morimoto that I installed last week. I'm guessing they should still look okay with 5000k fog lights. Couldn't find a 4500k Cree LED.
So the bulb on the link fit your connector no problem? I guess it obviously did lol. I assume it will work in my 2014. The higher wattage of an H11 bulb shouldn't be a problem since LEDs produce very little heat.
01-26-17, 01:38 PM
2013 LED Fog Light Install
