When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I think you are right guys this lexus must be replaced with something much better ,o think Tesla is not bad solution.
lexus is more like hobie car to practice and improve some stuff but tesla looks like way to go. Even Joda agreed that tesla is better than Lexus es 300h.
It includes the electrical diagrams. You may want to lookup pinout for the throttle body and check it directly with a multimeter. I can help it you need any reference from a working 300h (e.g. compare resistance of the motor).
I will try to do diagnose next week and i will tell you results.
thank you for your help ,
hi there,
it was a while since i posted any update on this ongoing problems wit ES 300H
new throttle body installed no improvement's
new ECU installed and reprogammed using paper clip about 30 min. no improveme;;ts
new MAF SENSOR no improvements
new gas pedal with position sensor installed no improvements
HERE WE GOT additional P2135 CODE
finally bypas one wire by throttle body 12v no improvement's
reading was confusing on multimeter we always got about 11 or 11.2 v on other side of connector
and here is what happened....
After enjoying few days recent success with enabling ES 300h we did now hooked up to tech stream software just to confirm why
throttle position was ON all the time
now after BYPASSING connections
throttle possition is OFF and goes BACK ON after you start engine.
next we have to cleanup with 44K by BG ,oil change and some other minor things,air filter,cabin filter ,etc etc. Here we can see that position of throttle sensor Off