While replacing the spark plugs and the coil packs the connector to the cam sensor on bank 1 sensor b got damaged and the wiring order is unknown. It is the cam sensor on the back cylinders in the center of the valve cover. Does anyone have a wiring diagram or a photo of the order of the wires? This is on a 2007 ES350. Thanks for any help.

 

See these
​​​​​​https://www.clublexus.com/forums/es-...il-rewire.html

https://www.justanswer.com/car/itmgk...schematic.html

You can buy a pigtail for it on Amazon. The same one fits a bunch of Toyota-Lexus models

 

I’m waiting on the depining tool from Amazon as we speak. my question is how do you know what size the pins are? Or if they are male/ female for this camshaft sensor ?

Attached is a picture of what I currently have. I pulled the yellow wire out doing my spark plugs. My plan was to depin the wire from the connector and then repin with new weather protection. I purchased a pigtail on Amazon but was thinking that the oem connector, although old would be better than Amazon after market. Plus the color of the wires are in a different order than what’s currently on the car.

Mike ​​​​​​​

 

pin1=yellow, pin2=black, pin3=red was the correct pattern for my car. And I purchase a new pigtail also just like the one in nynex909 image. The new pigtail had the black and yellow wires reversed.