Have problem to program my 2010 E350 remote after changed my garage opener from Genie to Chamberlain. Tried several times as shown in Lexus' how-to videos, but didn't work. It had no problem at all when I had the car remote programmed to Genie garage opener 2 years ago. Anyone has any idea or suggestions?[/B]

 

I seem to remember in the past, owners having luck calling the Homelink number for a fix or walk through. It seems like it's probably an easy fix. Is there anything in the owners manual that might help? I usually keep the manual handy when setting up the garage door opener.

 

It is in the user manual. I used it to set mine up. It's possible that all the buttons are pre-programmed and they need to be cleared first before programming a new garage door opener.

 

I had a hard time getting mine reprogrammed . I wondered if it was because of the "rolling code" on in the garage. I gave up and use the remotes that come with the unit. I did the same thing with a Cadillac I inherited.

 

The system works for rolling codes. You need to clear/delete existing codes and park the car as close to the door opener as possible. Then follow the OM and it should work without any problems.

 

Thanks everyone here. i finally did it. what i had to do was to re-program the remote, and program again.
Thank you all!