Door Panel Light's
 

Well, on my quest to get rid of all the yellow lights in the car, I moved to the door panel lights, and I got the assembly out, and it looks like this......

http://i139.photobucket.com/albums/q.../IMG_00581.jpg

Opened it up and got this.........

http://i139.photobucket.com/albums/q.../IMG_00591.jpg



and this....

http://i139.photobucket.com/albums/q.../IMG_00601.jpg



Has anyone changed these? I have found that it is a 168 bulb, and I found this on V-LED's
http://www.v-leds.com/5K-WHITE-13-LE...04828-1-3.html
but worried that it is going to fit. It was a pretty snug fit.....

http://i139.photobucket.com/albums/q.../IMG_00611.jpg

Hey, i have changed mine to clear white LED's, not sure of the brand as I got them from a local supplier, probably nothing special. All I say is that there where no issues with the bulb fitting into the housing. but the plastic clip on the left side of picture 2 was unable to fit back onto the housing. This is probably due to my LED having a wide lip around the bulb, hereby preventing the clip from going onto the housing properly. I will try and post a picture of what it looks like tomorrow.

I went with a 2 LED flank but it seems VLEDs don't have them anymore.Just a 4 LED flank that may be too long.
Second choice would have been these.Kind of a waste because the LEDs are 360 style but these bulbs do the job of taking the yellow away and give a nice white light.I've used these bulbs in door panels before..

http://www.v-leds.com/5K-WHITE-HIGH-...85865-1-2.html

Well, I finally got the chance to change out my bulbs. As I thought, the housing was too small, and the bulbs were considerably longer........but not an issue for the Dremel! Just shaved a little of the housing........see following.

http://i139.photobucket.com/albums/q...y/IMG_0070.jpg

http://i139.photobucket.com/albums/q...y/IMG_0071.jpg

Before the trimming of the housing.....

http://i139.photobucket.com/albums/q...y/IMG_0072.jpg

After the trim.......

http://i139.photobucket.com/albums/q...y/IMG_0073.jpg

I will take pictures tonight after it gets dark of the final result.