Hi i was wondering on how to remove the cigarette lighter on my 1996 es 300. A nice and well discriptive instruction would be nice. Thanks in advance

 

does anyone know. I really need to remove it fast

 

just follow the first few steps, improvise a little bit to remove cigarette lighter assembly and you should be good.

https://www.clublexus.com/forums/sho...d.php?t=158636

why did you have to remove the cig lighter, anyway?

 

i have to replace the cigarette lighter because it just stop working. My dad plug in an invertor and this huming sound started from the invertor. After i unplug the invertor the cigarette lighter hasnt work ever since. I check one fuse and it still look good, so im pretty sure it the cigarette lighter itself.

 

okay does anyone know how to "pop out" the wood grain around the shifter? Im scared that i might break it or crack it. Thanks in advance

 

https://www.clublexus.com/forums/sho...hreadid=143264

 

read the comments on that fitst post sent you bro come on.

on the second page, it says "Sure. You need to take a flathead [screwdriver] and pop the woodgrain out. The best place would be in the dip underneath the end of the emergency brake. Just stick in the flathead and lift directly up."

 

I thought this guide would come in handy. Score one for me!

 

I just pulled it out with some pliers.

 

okay thank you for all your help and response but i have another question how do i remove the cigarette lighter itself? Can i buy a universal cigarette lighter to replace it or do i have to get one from lexus

 

did you ever figure out how to pull the socket itself out?

 

If I'm looking at this correctly...this thread started in 2006...

 

I just did it. You remove the shift plate surround.
Remove the black housing around the lighter (there are two clips holding it under the plug)
If you look inside the lighter, there are two green tabs. You need to get a small screwdriver in between the metal surround and the green tabs. This will release the metal lining. You need to do this from the wiring side of the lighter.
Push the metal lining of the lighter through to release