ES - 1st to 4th Gen (1990-2006) Forum for all 1990 - 2006 ES300 and ES330 models. ES250 topics go here as well.

1999 es300 no start neep help

Thread Tools
 
Search this Thread
 
Old 09-16-18, 01:15 PM
  #1  
Tayler
Driver School Candidate
Thread Starter
 
Tayler's Avatar
 
Join Date: Sep 2018
Location: NY
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default 1999 es300 no start neep help

Was driving my car home and suddenly felt like the car was running out of gas spitting and sputtering so I pulled over shut if off. Noticed instantly the cat was glowing red hot but the temp gage was normal. So I was about a mile from home I forced it there spitting and sputtering the whole way I parked it and it was idling rough and so I **** it don't and left it alone. and the next day it wouldn't start. It's got compression spark and fuel. I think it's getting too much gas maybe? I know that the cat isn't completely clogged I've tried Un screwing the 02 sensor upstream nothing is seeming to work the spark plugs are saturated in gas. And sometimes it will start for about 15 20 seconds with a rough idle and die instantly. Help please
Old 09-16-18, 02:44 PM
  #2  
Mrv8q
Driver
 
Mrv8q's Avatar
 
Join Date: Oct 2013
Location: CA
Posts: 63
Received 10 Likes on 9 Posts
Default

Check MAF sensor.
Old 09-16-18, 03:11 PM
  #3  
Tayler
Driver School Candidate
Thread Starter
 
Tayler's Avatar
 
Join Date: Sep 2018
Location: NY
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

I just bought a oem denso maf 2 months ago hoping it would help resolve a knock sensor issue. It ran normally. I could try putting the old one back in, I'm not sure if the knock sensors could be related to this but let hasn't been an issue so far
Old 09-16-18, 04:38 PM
  #4  
Mrv8q
Driver
 
Mrv8q's Avatar
 
Join Date: Oct 2013
Location: CA
Posts: 63
Received 10 Likes on 9 Posts
Default

Knock sensors will throw a specific code, I forget the code number.
CEL on? Any code from the port?
Old 09-21-18, 07:26 PM
  #5  
Tayler
Driver School Candidate
Thread Starter
 
Tayler's Avatar
 
Join Date: Sep 2018
Location: NY
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

Yes the regular p0330 and p0325 come on every once in a while for the knock sensor codes. And yes the abs is on and trac off ight flashes
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scjunky94
Performance & Maintenance
34
04-18-22 05:49 AM
Tartar
ES - 1st to 4th Gen (1990-2006)
0
11-10-18 02:27 PM
SnOwY22
Performance & Maintenance
7
06-16-13 11:37 AM
DesertDave
ES - 1st to 4th Gen (1990-2006)
6
06-27-11 01:24 AM
Jysc400
SC- 1st Gen (1992-2000)
16
01-24-11 07:05 PM



Quick Reply: 1999 es300 no start neep help



All times are GMT -7. The time now is 12:33 AM.