Lexus es300 1997 switching shifter and putting in boot
#1
Driver School Candidate
Thread Starter
Join Date: May 2013
Location: Il
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Lexus es300 1997 switching shifter and putting in boot
I recently took out the stock snifter and put in a different one and after that covered the bottom with a boot let me know what you guys think and if you need some instructions on how to do this I would be more than happy to give step by step instructions.
P.S. I will probably pull the boot down more because I think it looks too bulky
[IMG][/IMG]]
P.S. I will probably pull the boot down more because I think it looks too bulky
[IMG][/IMG]]
Last edited by vladtheman; 07-08-13 at 03:19 PM.
Trending Topics
#8
Driver School Candidate
Thread Starter
Join Date: May 2013
Location: Il
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
http://www.aliexpress.com/item/7-inc...747392323.html
This is actually the exact one I ordered from that person, I picked it out because this is by far the cheapest 2DIN with GPS that I saw around.
#9
Driver School Candidate
Thread Starter
Join Date: May 2013
Location: Il
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
That is actually one of the only complaints I have about it, I would love to have that too, but as you have said that would take too much investment.
Thread
Thread Starter
Forum
Replies
Last Post
southern
ES - 1st to 4th Gen (1990-2006)
7
01-10-17 09:32 AM
bloodyKnuc
ES - 1st to 4th Gen (1990-2006)
0
12-11-16 07:57 AM