Now that i got the Woods project running....I have ordered some really nice brake line...This stuff is sweet you font need a special tool to bend it it bends by hand and is garunteed not to kink....so for a 25ft spool of 3/16th brake line with no fittings it cost me $45 not too bad if i can make it stretch for the whole car....Fuel line was a little more pricey at 25ft for $85 made from the same material....so just to replace the lines in the car that are all rotted with fittings i dumped about $175 into replacing the lines and all the fittings.....I started the body work today but got a little caught up with the 3/4 panels anyone know where i can get a decent picture of one of these so i have a rough idea of the curve on the 3/4 panels....all i did was just block it in so it looks like i have a 2x4 sticking to the side of the 3/4 panel on each side then on friday im gonna start scupting the 3/4 panels.....I really need to find a good solid picture of the 3/4 panel i dunno if anyone has a ES250 or not but if you do SEND me some pics of passenger and driver side 3/4 panels!