So i got a bunch of leds...
#19
Driver School Candidate
Join Date: Jan 2010
Location: VA
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
bulb replacement help????????
Do you guys have any idea what type a bulb is this one, because im been googled but still got no clues, help me out please i got it from the front map dome light of my 94 es....thanks guy,
ON THE BULB SAY : "LIFE 12V 10W"
ON THE BULB SAY : "LIFE 12V 10W"
#20
Driver School Candidate
Join Date: Jan 2010
Location: VA
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
wow really? that really sucks, because i almost completed the led conversion in about like 90% and now im stuck with this bulb,so any other though or anyone know wat type the bulb is that one...pleaseeee thanksss
#21
Driver School Candidate
Join Date: Jan 2010
Location: VA
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
^^ Okay, so it's apparently a "BA9S" bulb, and they are available in LED, you just have to search eBay/whatever under "BA9S LED"... Don't hold me to it, i am merely assuming since there is another slightly smaller size in this type of bulb too, but i couldn't find it on eBay, so i am guessing its this one as it is probably more common.
GL!
*Thanks to Infinirx for the tip over in my RX330 thread!
-Mike
GL!
*Thanks to Infinirx for the tip over in my RX330 thread!
-Mike
P.S. i found a lot o them in here take a look if u have a chance ===> http://www.superbrightleds.com/cgi-b...A9S6_specs.htm
#22
Driver School Candidate
Join Date: Jan 2010
Location: VA
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
#24
Lead Lap
iTrader: (4)
Join Date: Apr 2009
Location: Seattle, Washington
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
^^ Just bought some LED's from him and received them yesterday. Very good quality stuff, excellent color and brightness.
Only issue was that one of them was burnt out (I tried flipping the bulb and switching the bulb to a different socket). I emailed him back and he's replacing it. So he has excellent customer service.
Only issue was that one of them was burnt out (I tried flipping the bulb and switching the bulb to a different socket). I emailed him back and he's replacing it. So he has excellent customer service.
#25
Driver School Candidate
Join Date: Jan 2010
Location: VA
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
^^ Just bought some LED's from him and received them yesterday. Very good quality stuff, excellent color and brightness.
Only issue was that one of them was burnt out (I tried flipping the bulb and switching the bulb to a different socket). I emailed him back and he's replacing it. So he has excellent customer service.
Only issue was that one of them was burnt out (I tried flipping the bulb and switching the bulb to a different socket). I emailed him back and he's replacing it. So he has excellent customer service.
#26
Lead Lap
iTrader: (4)
Join Date: Apr 2009
Location: Seattle, Washington
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I bought 5 bulbs from him, and I confirmed that one was burnt out. I emailed him and he quickly responded; sending me a new bulb free of charge, I don't even have to pay for shipping!
Highly recommended.
Highly recommended.
#27
#28
Driver School Candidate
Join Date: Jan 2010
Location: VA
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
hey LEXPL, how long is usually it take for shipping when u purchased those led from those guys, because the "monkey" guy said it usually take 14 days day to ship from HK to US, thankkssss
#29
Instructions:
See the tabs? Pull the middle 'pin out' as it is an expanding clip! So pulling out the little pin disengages the expansion and the clip should slide right out! Remove bulb housing, after which you should gain access to the bulbs/ replace. In similar fashion to above door panel method you may have to wiggle them out!
See the tabs? Pull the middle 'pin out' as it is an expanding clip! So pulling out the little pin disengages the expansion and the clip should slide right out! Remove bulb housing, after which you should gain access to the bulbs/ replace. In similar fashion to above door panel method you may have to wiggle them out!