egr vacuum modulator p q hoses into tb
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2007
Location: ga
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
egr vacuum modulator p q hoses into tb
i cleaned my vacuum modulator.
but when i disconnected p, q hoses and when i blow air into p hose going to throttle body it doesn't pass the air through? is that normal? the q hose does allow air into tb.
i also have code p0401.
but when i disconnected p, q hoses and when i blow air into p hose going to throttle body it doesn't pass the air through? is that normal? the q hose does allow air into tb.
i also have code p0401.
Last edited by vstolyarov; 04-12-07 at 04:48 PM.
#3
Driver School Candidate
Thread Starter
Join Date: Mar 2007
Location: ga
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
check engine light is gone for now, after 45 miles of driving today didn't come back, i also cleaned the egr gas temperature sensor, but i believe my throttle body was clogged up pretty bad to not let the vacuum pass to modulator.
Thread
Thread Starter
Forum
Replies
Last Post
91LS400vgb
LS - 1st and 2nd Gen (1990-2000)
15
06-23-18 11:21 PM
amanda
ES - 1st to 4th Gen (1990-2006)
1
11-18-12 12:07 PM
MKLEX
ES - 1st to 4th Gen (1990-2006)
6
09-27-11 06:32 PM